Hi,
On Sat, 26 Mar 2005 02:51:16 -0500, [KS] <lists04@fastmail.fm> wrote:
Roberto Winter wrote:
FIXED!
Sorry everybody! The link I sent had the answer to all my problems.
On Debian the XF86Config-4 should be:
Section "InputDevice"
Identifier "Logitech MX510"
Option "CorePointer"
Driver "mouse"
Option "Dev Name" "Logitech USB-PS/2 Optical Mouse"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "evdev"
Option "Buttons" "10"
Option "ZAxisMapping" "9 10"
Option "Resolution" "800"
EndSection
note that there's no "Dev Phys" Option.
And you also have to compile the evdev module on the kernel. Then do:
# echo "evdev" >> /etc/modules
Hi,
I also bought this mouse recently. And going by the instructions at
http://www.linux-gamers.net/modules/wfsection/article.php?articleid=46 I
see that I have the evedev module loaded.
user@localhost:~$ lsmod | grep evdev
evdev 9504 0
I did the changes to the XF86Config-4 as:
Section "InputDevice"
Identifier "Mouse[0]"
Driver "mouse"
Option "Protocol" "evdev"
Option "Dev Name" "PS2++ Logitech MX Mouse"
Option "Dev Phys" "isa0060/serio1/input0"
Wow! This line shouldn't be there! "Dev Phys" is not necessary (and I
don't know if it makes a difference, but try removing it).
Option "Device" "/dev/psaux"
Option "Buttons" "10"
Option "ZAxisMapping" "9 10"
Option "Resolution" "800"
EndSection
However, the buttons 6,7 (arrows for thumb), 8,9 (buttons besides wheel)
and the button 10 just copy the functions of other buttons for me, with
#10 not showing anything. Button 10 doesn't show me anything when using
xev too!
Any suggestions?
It was happening to me when using the wrong protocol... weird....
It could be that you have the "cruise control" thing enabled, you have
to download the "logitech applet" and disable it (you'll find it here:
http://freshmeat.net/projects/logitech_applet/ ).
http://www.linux-gamers.net/modules/wfsection/article.php?articleid=47
Get back here afterward telling if it worked.