sday, 02.02.2005 at 09:10 -0800, Gerard J. Cerchio wrote:
Greetings all,
I have multiple Cisco ATA 188 phone adapters behind a Debian Woody 2.4
kernel acting as a NAT to a single Internet IP address.
The phones all make outgoing calls just fine. The incoming calls cannot
get through.
Does anyone have an iptables NAT script that will allow the phones to
work both ways?
Here are my current entries:
iptables -t nat -A POSTROUTING -s $MASQ_NET -o $EXT -j MASQUERADE
iptables -t nat -A PREROUTING -d $EXTIP -p tcp --dport 16384 -j DNAT
--to-dest 10.10.0.12:16384
iptables -t nat -A PREROUTING -d $EXTIP -p udp --dport 16384 -j DNAT
--to-dest 10.10.0.12:16384
iptables -A FORWARD -i eth0 -p udp -d 10.10.0.12 --dport 16384 -j ACCEPT
iptables -A FORWARD -i eth0 -p tcp -d 10.10.0.12 --dport 16384 -j ACCEPT
where 16384 is the media port on the ATA188 (there is a set for each ATA188)
the -FORWARD's don't seem to do anything
Can you tell us what $MASQ_NET and $EXT refer to? Which interface is
eth0? etc.
Dave.