Re: Cannot get resolution just by edit /etc/XF86Config PLS help.
On Fri, 2005-01-28 at 14:27 +0100, Wim De Smet wrote:
> We could probably tell you what chipset you should use if you send us
> a mail with the output of "lspci -v" attached. (This is a command you
> can enter in a console)
guess I'll bite at this offer since I too can't get my resolution as
high as I'd like (the max seems to be 1024x768 @60Hz at the moment); so
here's my lspci info & current /etc/X11/XF86Config-4 -- all advice most
welcome. Thanks, Michael
Attached should be lspci and XF86Config-4 files
0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 0a)
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, fast devsel, latency 0
Capabilities: [40] #09 [d105]
0000:00:00.1 ff00: Intel Corp. Memory Controller Hub Error Reporting Register (rev 0a)
Subsystem: Intel Corp.: Unknown device 343f
Flags: fast devsel
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 0a) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
Capabilities: [64] #10 [0041]
0000:00:03.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A1 (rev 0a) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Capabilities: [50] Power Management version 2
Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
Capabilities: [64] #10 [0041]
0000:00:1c.0 PCI bridge: Intel Corp. 6300ESB 64-bit PCI-X Bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Capabilities: [50] PCI-X bridge device.
0000:00:1d.0 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d880 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 6300ESB USB Universal Host Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at dc00 [size=32]
0000:00:1d.4 System peripheral: Intel Corp. 6300ESB Watchdog Timer (rev 02)
Subsystem: Intel Corp.: Unknown device 343f
Flags: medium devsel
Memory at deeff800 (32-bit, non-prefetchable) [size=16]
0000:00:1d.5 PIC: Intel Corp. 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) (prog-if 20 [IO(X)-APIC])
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, fast devsel, latency 0
Capabilities: [50] PCI-X non-bridge device.
0000:00:1d.7 USB Controller: Intel Corp. 6300ESB USB2 Enhanced Host Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at deeffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [2080]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 0a) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: def00000-dfffffff
0000:00:1f.0 ISA bridge: Intel Corp. 6300ESB LPC Interface Controller (rev 02)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corp. 6300ESB PATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at fc00 [size=16]
Memory at 80000000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.2 IDE interface: Intel Corp. 6300ESB SATA Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=8]
I/O ports at d080 [size=4]
I/O ports at d000 [size=16]
0000:00:1f.3 SMBus: Intel Corp. 6300ESB SMBus Controller (rev 02)
Subsystem: Intel Corp.: Unknown device 343f
Flags: medium devsel, IRQ 17
I/O ports at 0400 [size=32]
0000:04:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, stepping, medium devsel, latency 64, IRQ 17
Memory at df000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at e800 [size=256]
Memory at defff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at defc0000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
0000:04:03.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05)
Subsystem: Intel Corp.: Unknown device 343f
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at defa0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at ec00 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device.
0000:04:04.0 Multimedia audio controller: Creative Labs SB Audigy LS
Subsystem: Creative Labs: Unknown device 1006
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at e480 [size=32]
Capabilities: [dc] Power Management version 2
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "ati"
EndSection
Section "Monitor"
Identifier "SDM-X93"
HorizSync 28-50
VertRefresh 43-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "SDM-X93"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
#michael added new modes & virtual
# Modes "800x600" "640x480"
Modes "1280x1024" "1600x1200" "1152x864" "1024x768" "800x600" "640x480"
### Virtual 1024 768
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
Reply to: