Re: configuring HP9100 CDWriter to burn CD;s
try "cdrecord -dev=ATAPI -scanbus" which would give you a list of ATAPI
cd recorders
e.g. on my box:
debianServer:~# cdrecord -dev=ATAPI -scanbus
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) *
0,1,0 1) 'PLEXTOR ' 'CD-R PX-W1210A' '1.10' Removable CD-ROM
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
in my case to use the IDE CD-recorder : "cdrecord -dev=ATAPI:0,1,0
./Linux.iso" ==> you will change this to the number which is shown to
the left of your CD-recorder name.
This avoids needing the "ide-scsi" module
Vijaya S wrote:
Hi all,
I have fixed a HP 9100 CDWRITER on to a Debian sarge with 2.6.7 kernel.
i have installed cdrecord via apt-get.
i am not able to write cds with it..
How do I configure it..
When i do cdrecord -scanbus i get the following error:-
sh-2.05b# cdrecord -scanbus
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original
version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this
version.
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open
SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord:
cdrecord: For more information, install the cdrtools-doc
cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
i am able to modproble ide-scsi ,sg, ide-cd..
what am i missing and how do i get to burn cds.
Thanks and regards,
Vijaya
Reply to: