Re: 'DriveReady SeekComplete Error' ?

[Luiso Pérez <luiso.perez@gmail.com>]

Hi Adam,

Your hard disk isn't broken, there is a problem whith the bios and
linux, probe tu disable ulra dma on bios setup.

Please tell me since it has gone to you!!


----- Original Message -----
From: Adam Bogacki <afb@paradise.net.nz>
Date: Thu, 17 Jun 2004 23:09:44 +1200
Subject: 'DriveReady SeekComplete Error' ?
To: debian-user@lists.debian.org
Cc: jel@ntlworld.com





  
  


Thanks. I tried 



 rm -rf /dev/dvd


ln -s /dev/hdc /dev/dvd




... but am not having success in mounting dvd and dmesg is giving me
the output below 

which I can't interpret. Can someone tell me what 



'DriveReady SeekComplete Error' means ?



Adam Bogacki,

afb@paradise.net.nz




Tux:~# mount -t iso9660 /dev/hdc /mnt/dvd

mount: block device /dev/hdc is write-protected, mounting read-only

mount: wrong fs type, bad option, bad superblock on /dev/hdc,

       or too many mounted file systems


This error message is new. Mounting a Pioneer dvd player - which plays
CD's - 

and *also* mounting a CDRW should not be a problem (allowing me
to use cdrecord).



Tux:~# dmesg



<snip>


hdc: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.20

hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA

SCSI subsystem initialized

Linux Kernel Card Services

  options:  [pci] [cardbus] [pm]

input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1

hdc: command error: status=0x51 { DriveReady SeekComplete Error }

hdc: command error: error=0x50

end_request: I/O error, dev hdc, sector 64

isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16

hdc: command error: status=0x51 { DriveReady SeekComplete Error }

hdc: command error: error=0x50

end_request: I/O error, dev hdc, sector 64

isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16

udf: registering filesystem

UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no,
vol_desc_s tart=0

UDF-fs DEBUG fs/udf/super.c:1546:udf_fill_super: Multi-session=0

UDF-fs DEBUG fs/udf/super.c:534:udf_vrs: Starting at sector 16 (2048
byte secto rs)

hdc: command error: status=0x51 { DriveReady SeekComplete Error }

hdc: command error: error=0x50

end_request: I/O error, dev hdc, sector 64

UDF-fs DEBUG fs/udf/super.c:1282:udf_check_valid: Failed to read byte
32768. As suming open disc. Skipping validity check

hdc: command error: status=0x51 { DriveReady SeekComplete Error }

hdc: command error: error=0x50

end_request: I/O error, dev hdc, sector 1280796

hdc: command error: status=0x51 { DriveReady SeekComplete Error }











-- 

                        (o_ 
      (o_   (o_    //\
      (/)_   (\)_   V_/_
    Luis Pérez Meliá