[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: accessing a fuji digital camera



Andrew Perrin wrote:

On Mon, 14 Jun 2004, LeVA wrote:

Hi!

I want to download the pictures from a fuji digital camera.

Hi - I use a fuji finepix 310 with no problems.

When I plug it in the usb port, my kernel detects the camera:

-----------###-----------
Jun 14 20:40:22 leva kernel: scsi1 : SCSI emulation for USB Mass Storage
devices
Jun 14 20:40:22 leva kernel:   Vendor: FUJIFILM  Model: USB-DRIVEUNIT
Rev: 1.00
Jun 14 20:40:22 leva kernel:   Type:   Direct-Access
ANSI SCSI revision: 02
Jun 14 20:40:22 leva kernel: Attached scsi removable disk sda at scsi1,
channel 0, id 0, lun 0

... good, so the card is available as drive sda

Jun 14 20:40:22 leva kernel: SCSI device sda: 32000 512-byte hdwr
sectors (16 MB)
Jun 14 20:40:22 leva kernel: usb-uhci.c: interrupt, status 3, frame# 611
Jun 14 20:40:22 leva kernel: sda: Write Protect is off
Jun 14 20:40:22 leva kernel:  sda: sda1
Jun 14 20:40:22 leva kernel: WARNING: USB Mass Storage data integrity
not assured
Jun 14 20:40:22 leva kernel: USB Mass Storage device found at 2
-----------###-----------

And after I try to mount it (mount /dev/sda /mnt/fuji):

There's your problem. You need to mount the partition, not the block
device:

mount /dev/sda1 /mnt/fuji

I usually use the following:

mount -tvfat -oumask=0000 /dev/sda1 /mnt/fuji

mount -t vfat -oumask=0000 /dev/sda1 /mnt/fuji
?????    ^^^^^

is the space reqd ?

which will allow normal users to access the filesystem.

Cheers,
Andy


----------------------------------------------------------------------
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
clists@perrin.socsci.unc.edu * andrew_perrin (at) unc.edu







Reply to: