Re: accessing a fuji digital camera
On Mon, 14 Jun 2004, LeVA wrote:
> Hi!
>
> I want to download the pictures from a fuji digital camera.
Hi - I use a fuji finepix 310 with no problems.
> When I plug it in the usb port, my kernel detects the camera:
>
> -----------###-----------
> Jun 14 20:40:22 leva kernel: scsi1 : SCSI emulation for USB Mass Storage
> devices
> Jun 14 20:40:22 leva kernel: Vendor: FUJIFILM Model: USB-DRIVEUNIT
> Rev: 1.00
> Jun 14 20:40:22 leva kernel: Type: Direct-Access
> ANSI SCSI revision: 02
> Jun 14 20:40:22 leva kernel: Attached scsi removable disk sda at scsi1,
> channel 0, id 0, lun 0
... good, so the card is available as drive sda
> Jun 14 20:40:22 leva kernel: SCSI device sda: 32000 512-byte hdwr
> sectors (16 MB)
> Jun 14 20:40:22 leva kernel: usb-uhci.c: interrupt, status 3, frame# 611
> Jun 14 20:40:22 leva kernel: sda: Write Protect is off
> Jun 14 20:40:22 leva kernel: sda: sda1
> Jun 14 20:40:22 leva kernel: WARNING: USB Mass Storage data integrity
> not assured
> Jun 14 20:40:22 leva kernel: USB Mass Storage device found at 2
> -----------###-----------
>
> And after I try to mount it (mount /dev/sda /mnt/fuji):
There's your problem. You need to mount the partition, not the block
device:
mount /dev/sda1 /mnt/fuji
I usually use the following:
mount -tvfat -oumask=0000 /dev/sda1 /mnt/fuji
which will allow normal users to access the filesystem.
Cheers,
Andy
----------------------------------------------------------------------
Andrew J Perrin - http://www.unc.edu/~aperrin
Assistant Professor of Sociology, U of North Carolina, Chapel Hill
clists@perrin.socsci.unc.edu * andrew_perrin (at) unc.edu
Reply to: