raidhotadd not working after reboot?!?
Recently when starting my computer I was notified by the Adaptec SCSI BIOS
that my disk ID #4 was not starting up. This disk was failed. This disk is
part of the software raid array that I have setup on the machine.
When the kernel booted it notified me that it could not see the disk and as
a result my raid 5 array was in a failed state. I shutdown the computer,
replaced the drive with an identical one and proceeded to restart the
computer. The Adaptec SCSI BIOS noticed the drive and linux booted. At
this point the RAID 5 array was still in a failed state.
In the console I typed the following:
lsraid -R -p
And got the following output:
# md device [dev 9, 0] /dev/md0 queried online
raiddev /dev/md0
raid-level 5
nr-raid-disks 5
nr-spare-disks 0
persistent-superblock 1
chunk-size 32
device /dev/sdb1
raid-disk 0
device /dev/sdc1
raid-disk 1
device /dev/sdd1
raid-disk 2
device /dev/sde1
raid-disk 3
device /dev/null
failed-disk 4
root@geocentric:~#
I then proceeded to run "raidhotadd /dev/md0 /dev/sdf1" after setting up the
partition of /dev/sdf. The program launched the process md0_resync. After
this completed I ran:
lsraid -R -p
And got the following output:
# md device [dev 9, 0] /dev/md0 queried online
raiddev /dev/md0
raid-level 5
nr-raid-disks 5
nr-spare-disks 0
persistent-superblock 1
chunk-size 32
device /dev/sdb1
raid-disk 0
device /dev/sdc1
raid-disk 1
device /dev/sdd1
raid-disk 2
device /dev/sde1
raid-disk 3
device /dev/sdf1
raid-disk 4
So, it looks to me like everything worked OK. That is until I reboot...
then I get the same failed-disk report as shown on top! Weird. Below is my
syslog. Sorry that I my post is so long, I thought it best to have more
information than not enough.
// Syslog
Jun 3 06:25:11 geocentric syslogd 1.4.1#14: restart.
Jun 3 06:36:37 geocentric -- MARK --
Jun 3 06:56:37 geocentric -- MARK --
Jun 3 07:16:37 geocentric -- MARK --
Jun 3 07:17:01 geocentric /USR/SBIN/CRON[4146]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 07:36:37 geocentric -- MARK --
Jun 3 07:56:37 geocentric -- MARK --
Jun 3 08:16:37 geocentric -- MARK --
Jun 3 08:17:01 geocentric /USR/SBIN/CRON[4169]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 08:36:37 geocentric -- MARK --
Jun 3 08:56:37 geocentric -- MARK --
Jun 3 09:16:37 geocentric -- MARK --
Jun 3 09:17:01 geocentric /USR/SBIN/CRON[4184]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 09:36:37 geocentric -- MARK --
Jun 3 09:52:40 geocentric shutdown[4205]: shutting down for system reboot
Jun 3 09:52:40 geocentric init: Switching to runlevel: 6
Jun 3 09:52:42 geocentric kernel: /dev/vmmon: Module vmmon: unloaded
Jun 3 09:52:42 geocentric kernel: bridge-eth0: down
Jun 3 09:52:42 geocentric kernel: bridge-eth0: detached
Jun 3 09:52:48 geocentric openvpn[386]: SIGTERM received, exiting
Jun 3 09:52:48 geocentric openvpn[386]: Closing TCP/UDP socket
Jun 3 09:52:48 geocentric openvpn[386]: Closing TUN/TAP device
Jun 3 09:52:48 geocentric xfs[457]: terminating
Jun 3 09:52:49 geocentric Xprt_64: Xprint server pid=531 done, exitcode=0.
Jun 3 09:52:51 geocentric proftpd[592]: geocentric.scc-wi.com - ProFTPD
killed (signal 15)
Jun 3 09:52:51 geocentric proftpd[592]: geocentric.scc-wi.com - ProFTPD
1.2.9 standalone mode SHUTDOWN
Jun 3 09:52:51 geocentric rpc.statd[585]: Caught signal 15, un-registering
and exiting.
Jun 3 09:52:51 geocentric kernel: Kernel logging (proc) stopped.
Jun 3 09:52:51 geocentric kernel: Kernel log daemon terminating.
Jun 3 09:52:51 geocentric exiting on signal 15
Jun 3 09:55:02 geocentric syslogd 1.4.1#14: restart.
Jun 3 09:55:02 geocentric kernel: klogd 1.4.1#14, log source = /proc/kmsg
started.
Jun 3 09:55:02 geocentric kernel: Inspecting /boot/System.map-2.6.3
Jun 3 09:55:02 geocentric kernel: Loaded 22705 symbols from
/boot/System.map-2.6.3.
Jun 3 09:55:02 geocentric kernel: Symbols match kernel version 2.6.3.
Jun 3 09:55:02 geocentric kernel: No module symbols loaded - kernel modules
not enabled.
Jun 3 09:55:02 geocentric kernel: Linux version 2.6.3 (root@geocentric)
(gcc version 3.3.3 (Debian)) #7 SMP Wed Mar 3 11:33:56 CST 2004
Jun 3 09:55:02 geocentric kernel: BIOS-provided physical RAM map:
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 0000000000000000 -
000000000009f800 (usable)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 000000000009f800 -
00000000000a0000 (reserved)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 0000000000100000 -
000000003ffe06c0 (usable)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 000000003ffe06c0 -
000000003ffe66c0 (ACPI data)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 000000003ffe66c0 -
000000003ffee700 (ACPI NVS)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 000000003ffee700 -
0000000040000000 (reserved)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 00000000fec00000 -
00000000fec01000 (reserved)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Jun 3 09:55:02 geocentric kernel: BIOS-e820: 00000000fff80000 -
0000000100000000 (reserved)
Jun 3 09:55:02 geocentric kernel: 127MB HIGHMEM available.
Jun 3 09:55:02 geocentric kernel: 896MB LOWMEM available.
Jun 3 09:55:02 geocentric kernel: found SMP MP-table at 0009fa00
Jun 3 09:55:02 geocentric kernel: hm, page 0009f000 reserved twice.
Jun 3 09:55:02 geocentric kernel: hm, page 000a0000 reserved twice.
Jun 3 09:55:02 geocentric kernel: hm, page 000ea000 reserved twice.
Jun 3 09:55:02 geocentric kernel: hm, page 000eb000 reserved twice.
Jun 3 09:55:02 geocentric kernel: On node 0 totalpages: 262112
Jun 3 09:55:02 geocentric kernel: DMA zone: 4096 pages, LIFO batch:1
Jun 3 09:55:02 geocentric kernel: Normal zone: 225280 pages, LIFO
batch:16
Jun 3 09:55:02 geocentric kernel: HighMem zone: 32736 pages, LIFO batch:7
Jun 3 09:55:02 geocentric kernel: DMI 2.3 present.
Jun 3 09:55:02 geocentric kernel: IBM machine detected. Enabling interrupts
during APM calls.
Jun 3 09:55:02 geocentric kernel: IBM machine detected. Disabling SMBus
accesses.
Jun 3 09:55:02 geocentric kernel: ACPI: RSDP (v000 IBM
) @ 0x000fdfe0
Jun 3 09:55:02 geocentric kernel: ACPI: RSDT (v001 IBM CDTPWSPF
0x00001010 IBM 0x00000000) @ 0x3ffe6640
Jun 3 09:55:02 geocentric kernel: ACPI: FADT (v001 IBM CDTPWSPF
0x00001010 IBM 0x00000000) @ 0x3ffe65c0
Jun 3 09:55:02 geocentric kernel: ACPI: MADT (v001 IBM CDTPWSPF
0x00001010 IBM 0x00000000) @ 0x3ffe6540
Jun 3 09:55:02 geocentric kernel: ACPI: DSDT (v001 IBM CDTPWSPF
0x00001000 MSFT 0x01000007) @ 0x00000000
Jun 3 09:55:02 geocentric kernel: ACPI: Local APIC address 0xfee00000
Jun 3 09:55:02 geocentric kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01]
enabled)
Jun 3 09:55:02 geocentric kernel: Processor #1 6:8 APIC version 17
Jun 3 09:55:02 geocentric kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00]
enabled)
Jun 3 09:55:02 geocentric kernel: Processor #0 6:8 APIC version 17
Jun 3 09:55:02 geocentric kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge
lint[0x1])
Jun 3 09:55:02 geocentric kernel: Using ACPI for processor (LAPIC)
configuration information
Jun 3 09:55:02 geocentric kernel: Intel MultiProcessor Specification v1.1
Jun 3 09:55:02 geocentric kernel: Virtual Wire compatibility mode.
Jun 3 09:55:02 geocentric kernel: OEM ID: IBM-PCCO Product ID: CDT-BIOS MP
APIC at: 0xFEE00000
Jun 3 09:55:02 geocentric kernel: I/O APIC #2 Version 32 at 0xFEC00000.
Jun 3 09:55:02 geocentric kernel: Enabling APIC mode: Flat. Using 1 I/O
APICs
Jun 3 09:55:02 geocentric kernel: Processors: 2
Jun 3 09:55:02 geocentric kernel: Built 1 zonelists
Jun 3 09:55:02 geocentric kernel: Kernel command line: auto
BOOT_IMAGE=LinuxCurrent ro root=803
Jun 3 09:55:02 geocentric kernel: Initializing CPU#0
Jun 3 09:55:02 geocentric kernel: PID hash table entries: 4096 (order 12:
32768 bytes)
Jun 3 09:55:02 geocentric kernel: Detected 999.945 MHz processor.
Jun 3 09:55:02 geocentric kernel: Using tsc for high-res timesource
Jun 3 09:55:02 geocentric kernel: Console: colour VGA+ 80x25
Jun 3 09:55:02 geocentric kernel: Memory: 1033968k/1048448k available
(1871k kernel code, 13584k reserved, 648k data, 364k init, 130944k highmem)
Jun 3 09:55:02 geocentric kernel: Checking if this processor honours the WP
bit even in supervisor mode... Ok.
Jun 3 09:55:02 geocentric kernel: Calibrating delay loop... 1974.27
BogoMIPS
Jun 3 09:55:02 geocentric kernel: Dentry cache hash table entries: 131072
(order: 7, 524288 bytes)
Jun 3 09:55:02 geocentric kernel: Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
Jun 3 09:55:02 geocentric kernel: Mount-cache hash table entries: 512
(order: 0, 4096 bytes)
Jun 3 09:55:02 geocentric kernel: CPU: After generic identify, caps:
0383fbff 00000000 00000000 00000000
Jun 3 09:55:02 geocentric kernel: CPU: After vendor identify, caps:
0383fbff 00000000 00000000 00000000
Jun 3 09:55:02 geocentric kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jun 3 09:55:02 geocentric kernel: CPU: L2 cache: 256K
Jun 3 09:55:02 geocentric kernel: CPU: After all inits, caps: 0383fbff
00000000 00000000 00000040
Jun 3 09:55:02 geocentric kernel: Intel machine check architecture
supported.
Jun 3 09:55:02 geocentric kernel: Intel machine check reporting enabled on
CPU#0.
Jun 3 09:55:02 geocentric kernel: Enabling fast FPU save and restore...
done.
Jun 3 09:55:02 geocentric kernel: Enabling unmasked SIMD FPU exception
support... done.
Jun 3 09:55:02 geocentric kernel: Checking 'hlt' instruction... OK.
Jun 3 09:55:02 geocentric kernel: POSIX conformance testing by UNIFIX
Jun 3 09:55:02 geocentric kernel: CPU0: Intel Pentium III (Coppermine)
stepping 06
Jun 3 09:55:02 geocentric kernel: per-CPU timeslice cutoff: 731.73 usecs.
Jun 3 09:55:02 geocentric kernel: task migration cache decay timeout: 1
msecs.
Jun 3 09:55:02 geocentric kernel: enabled ExtINT on CPU#0
Jun 3 09:55:02 geocentric kernel: ESR value before enabling vector:
00000000
Jun 3 09:55:02 geocentric kernel: ESR value after enabling vector: 00000000
Jun 3 09:55:02 geocentric kernel: Booting processor 1/0 eip 2000
Jun 3 09:55:02 geocentric kernel: Initializing CPU#1
Jun 3 09:55:02 geocentric kernel: masked ExtINT on CPU#1
Jun 3 09:55:02 geocentric kernel: ESR value before enabling vector:
00000000
Jun 3 09:55:02 geocentric kernel: ESR value after enabling vector: 00000000
Jun 3 09:55:02 geocentric kernel: Calibrating delay loop... 1994.75
BogoMIPS
Jun 3 09:55:02 geocentric kernel: CPU: After generic identify, caps:
0383fbff 00000000 00000000 00000000
Jun 3 09:55:02 geocentric kernel: CPU: After vendor identify, caps:
0383fbff 00000000 00000000 00000000
Jun 3 09:55:02 geocentric kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Jun 3 09:55:02 geocentric kernel: CPU: L2 cache: 256K
Jun 3 09:55:02 geocentric kernel: CPU: After all inits, caps: 0383fbff
00000000 00000000 00000040
Jun 3 09:55:02 geocentric kernel: Intel machine check architecture
supported.
Jun 3 09:55:02 geocentric kernel: Intel machine check reporting enabled on
CPU#1.
Jun 3 09:55:02 geocentric kernel: CPU1: Intel Pentium III (Coppermine)
stepping 06
Jun 3 09:55:02 geocentric kernel: Total of 2 processors activated (3969.02
BogoMIPS).
Jun 3 09:55:02 geocentric kernel: ENABLING IO-APIC IRQs
Jun 3 09:55:02 geocentric kernel: Setting 2 in the phys_id_present_map
Jun 3 09:55:02 geocentric kernel: ...changing IO-APIC physical APIC ID to 2
... ok.
Jun 3 09:55:02 geocentric kernel: init IO_APIC IRQs
Jun 3 09:55:02 geocentric kernel: IO-APIC (apicid-pin) 2-0, 2-9, 2-10,
2-11, 2-14, 2-20, 2-21, 2-22, 2-23 not connected.
Jun 3 09:55:02 geocentric kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Jun 3 09:55:02 geocentric kernel: number of MP IRQ sources: 22.
Jun 3 09:55:02 geocentric kernel: number of IO-APIC #2 registers: 24.
Jun 3 09:55:02 geocentric kernel: testing the IO
APIC.......................
Jun 3 09:55:02 geocentric kernel: IO APIC #2......
Jun 3 09:55:02 geocentric kernel: .... register #00: 02000000
Jun 3 09:55:02 geocentric kernel: ....... : physical APIC id: 02
Jun 3 09:55:02 geocentric kernel: ....... : Delivery Type: 0
Jun 3 09:55:02 geocentric kernel: ....... : LTS : 0
Jun 3 09:55:02 geocentric kernel: .... register #01: 00170020
Jun 3 09:55:02 geocentric kernel: ....... : max redirection entries:
0017
Jun 3 09:55:02 geocentric kernel: ....... : PRQ implemented: 0
Jun 3 09:55:02 geocentric kernel: ....... : IO APIC version: 0020
Jun 3 09:55:02 geocentric kernel: .... register #02: 00000000
Jun 3 09:55:02 geocentric kernel: ....... : arbitration: 00
Jun 3 09:55:02 geocentric kernel: .... IRQ redirection table:
Jun 3 09:55:02 geocentric kernel: NR Log Phy Mask Trig IRR Pol Stat Dest
Deli Vect:
Jun 3 09:55:02 geocentric kernel: 00 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 01 001 01 0 0 0 0 0 1 1
39
Jun 3 09:55:02 geocentric kernel: 02 001 01 0 0 0 0 0 1 1
31
Jun 3 09:55:02 geocentric kernel: 03 001 01 0 0 0 0 0 1 1
41
Jun 3 09:55:02 geocentric kernel: 04 001 01 0 0 0 0 0 1 1
49
Jun 3 09:55:02 geocentric kernel: 05 001 01 0 0 0 0 0 1 1
51
Jun 3 09:55:02 geocentric kernel: 06 001 01 0 0 0 0 0 1 1
59
Jun 3 09:55:02 geocentric kernel: 07 001 01 0 0 0 0 0 1 1
61
Jun 3 09:55:02 geocentric kernel: 08 001 01 0 0 0 0 0 1 1
69
Jun 3 09:55:02 geocentric kernel: 09 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 0a 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 0b 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 0c 001 01 0 0 0 0 0 1 1
71
Jun 3 09:55:02 geocentric kernel: 0d 001 01 0 0 0 0 0 1 1
79
Jun 3 09:55:02 geocentric kernel: 0e 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 0f 001 01 0 0 0 0 0 1 1
81
Jun 3 09:55:02 geocentric kernel: 10 001 01 1 1 0 1 0 1 1
89
Jun 3 09:55:02 geocentric kernel: 11 001 01 1 1 0 1 0 1 1
91
Jun 3 09:55:02 geocentric kernel: 12 001 01 1 1 0 1 0 1 1
99
Jun 3 09:55:02 geocentric kernel: 13 001 01 1 1 0 1 0 1 1
A1
Jun 3 09:55:02 geocentric kernel: 14 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 15 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 16 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: 17 000 00 1 0 0 0 0 0 0
00
Jun 3 09:55:02 geocentric kernel: IRQ to pin mappings:
Jun 3 09:55:02 geocentric kernel: IRQ0 -> 0:2
Jun 3 09:55:02 geocentric kernel: IRQ1 -> 0:1
Jun 3 09:55:02 geocentric kernel: IRQ3 -> 0:3
Jun 3 09:55:02 geocentric kernel: IRQ4 -> 0:4
Jun 3 09:55:02 geocentric kernel: IRQ5 -> 0:5
Jun 3 09:55:02 geocentric kernel: IRQ6 -> 0:6
Jun 3 09:55:02 geocentric kernel: IRQ7 -> 0:7
Jun 3 09:55:02 geocentric kernel: IRQ8 -> 0:8
Jun 3 09:55:02 geocentric kernel: IRQ12 -> 0:12
Jun 3 09:55:02 geocentric kernel: IRQ13 -> 0:13
Jun 3 09:55:02 geocentric kernel: IRQ15 -> 0:15
Jun 3 09:55:02 geocentric kernel: IRQ16 -> 0:16
Jun 3 09:55:02 geocentric kernel: IRQ17 -> 0:17
Jun 3 09:55:02 geocentric kernel: IRQ18 -> 0:18
Jun 3 09:55:02 geocentric kernel: IRQ19 -> 0:19
Jun 3 09:55:02 geocentric kernel: ....................................
done.
Jun 3 09:55:02 geocentric kernel: Using local APIC timer interrupts.
Jun 3 09:55:02 geocentric kernel: calibrating APIC timer ...
Jun 3 09:55:02 geocentric kernel: ..... CPU clock speed is 999.0532 MHz.
Jun 3 09:55:02 geocentric kernel: ..... host bus clock speed is 133.0271
MHz.
Jun 3 09:55:02 geocentric kernel: checking TSC synchronization across 2
CPUs: passed.
Jun 3 09:55:02 geocentric kernel: Starting migration thread for cpu 0
Jun 3 09:55:02 geocentric kernel: Starting migration thread for cpu 1
Jun 3 09:55:02 geocentric kernel: Brought up 1 CPUs
Jun 3 09:55:02 geocentric kernel: NET: Registered protocol family 16
Jun 3 09:55:02 geocentric kernel: PCI: PCI BIOS revision 2.10 entry at
0xfd32c, last bus=4
Jun 3 09:55:02 geocentric kernel: PCI: Using configuration type 1
Jun 3 09:55:02 geocentric kernel: mtrr: v2.0 (20020519)
Jun 3 09:55:02 geocentric kernel: SCSI subsystem initialized
Jun 3 09:55:02 geocentric kernel: PCI: Probing PCI hardware
Jun 3 09:55:02 geocentric kernel: PCI: Probing PCI hardware (bus 00)
Jun 3 09:55:02 geocentric kernel: Transparent bridge - 0000:00:1e.0
Jun 3 09:55:02 geocentric kernel: PCI: Using IRQ router PIIX/ICH
[8086/2410] at 0000:00:1f.0
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B0,I31,P3) ->
19
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B0,I31,P1) ->
17
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B0,I31,P1) ->
17
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B3,I6,P0) -> 18
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B3,I6,P1) -> 19
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B3,I7,P0) -> 19
Jun 3 09:55:02 geocentric kernel: PCI->APIC IRQ transform: (B4,I12,P0) ->
16
Jun 3 09:55:02 geocentric kernel: Starting balanced_irq
Jun 3 09:55:02 geocentric kernel: ikconfig 0.7 with /proc/config*
Jun 3 09:55:02 geocentric kernel: highmem bounce pool size: 64 pages
Jun 3 09:55:02 geocentric kernel: Linux agpgart interface v0.100 (c) Dave
Jones
Jun 3 09:55:02 geocentric kernel: agpgart: Detected an Intel i840 Chipset.
Jun 3 09:55:02 geocentric kernel: agpgart: Maximum main memory to use for
agp memory: 941M
Jun 3 09:55:02 geocentric kernel: agpgart: AGP aperture is 64M @ 0xf4000000
Jun 3 09:55:02 geocentric kernel: [drm] Initialized mga 3.1.0 20021029 on
minor 0
Jun 3 09:55:02 geocentric kernel: Serial: 8250/16550 driver $Revision: 1.90
$ 8 ports, IRQ sharing disabled
Jun 3 09:55:02 geocentric kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 3 09:55:02 geocentric kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jun 3 09:55:02 geocentric kernel: Using anticipatory io scheduler
Jun 3 09:55:02 geocentric kernel: Floppy drive(s): fd0 is 1.44M
Jun 3 09:55:02 geocentric kernel: FDC 0 is a National Semiconductor PC87306
Jun 3 09:55:02 geocentric kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Jun 3 09:55:02 geocentric kernel: ide: Assuming 33MHz system bus speed for
PIO modes; override with idebus=xx
Jun 3 09:55:02 geocentric kernel: ICH: IDE controller at PCI slot
0000:00:1f.1
Jun 3 09:55:02 geocentric kernel: ICH: chipset revision 2
Jun 3 09:55:02 geocentric kernel: ICH: not 100%% native mode: will probe
irqs later
Jun 3 09:55:02 geocentric kernel: ide1: BM-DMA at 0xfff8-0xffff, BIOS
settings: hdc:DMA, hdd:DMA
Jun 3 09:55:02 geocentric kernel: hdc: PLEXTOR DVDR PX-708A, ATAPI
CD/DVD-ROM drive
Jun 3 09:55:02 geocentric kernel: hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM
drive
Jun 3 09:55:02 geocentric kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 3 09:55:02 geocentric kernel: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW
CD-MRW drive, 2048kB Cache, UDMA(33)
Jun 3 09:55:02 geocentric kernel: Uniform CD-ROM driver Revision: 3.20
Jun 3 09:55:02 geocentric kernel: hdd: ATAPI 48X CD-ROM CD-R/RW CD-MRW
drive, 2048kB Cache, UDMA(33)
Jun 3 09:55:02 geocentric kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI
HBA DRIVER, Rev 6.2.36
Jun 3 09:55:02 geocentric kernel: <Adaptec aic7899 Ultra160 SCSI
adapter>
Jun 3 09:55:02 geocentric kernel: aic7899: Ultra160 Wide Channel A,
SCSI Id=7, 32/253 SCBs
Jun 3 09:55:02 geocentric kernel:
Jun 3 09:55:02 geocentric kernel: (scsi0:A:0): 160.000MB/s transfers
(80.000MHz DT, offset 63, 16bit)
Jun 3 09:55:02 geocentric kernel: (scsi0:A:1): 160.000MB/s transfers
(80.000MHz DT, offset 63, 16bit)
Jun 3 09:55:02 geocentric kernel: (scsi0:A:2): 160.000MB/s transfers
(80.000MHz DT, offset 63, 16bit)
Jun 3 09:55:02 geocentric kernel: (scsi0:A:3): 160.000MB/s transfers
(80.000MHz DT, offset 63, 16bit)
Jun 3 09:55:02 geocentric kernel: (scsi0:A:4): 160.000MB/s transfers
(80.000MHz DT, offset 63, 16bit)
Jun 3 09:55:02 geocentric kernel: (scsi0:A:5): 160.000MB/s transfers
(80.000MHz DT, offset 63, 16bit)
Jun 3 09:55:02 geocentric kernel: Vendor: ZJCS Model: ZJCS2-36GB
Rev: S5BS
Jun 3 09:55:02 geocentric kernel: Type: Direct-Access
ANSI SCSI revision: 03
Jun 3 09:55:02 geocentric kernel: scsi0:A:0:0: Tagged Queuing enabled.
Depth 32
Jun 3 09:55:02 geocentric kernel: Vendor: ZJCS Model: ZJCS2-36GB
Rev: S5BS
Jun 3 09:55:02 geocentric kernel: Type: Direct-Access
ANSI SCSI revision: 03
Jun 3 09:55:02 geocentric kernel: scsi0:A:1:0: Tagged Queuing enabled.
Depth 32
Jun 3 09:55:02 geocentric kernel: Vendor: ZJCS Model: ZJCS2-36GB
Rev: S5BS
Jun 3 09:55:02 geocentric kernel: Type: Direct-Access
ANSI SCSI revision: 03
Jun 3 09:55:02 geocentric kernel: scsi0:A:2:0: Tagged Queuing enabled.
Depth 32
Jun 3 09:55:02 geocentric kernel: Vendor: ZJCS Model: ZJCS2-36GB
Rev: S5BS
Jun 3 09:55:02 geocentric kernel: Type: Direct-Access
ANSI SCSI revision: 03
Jun 3 09:55:02 geocentric kernel: scsi0:A:3:0: Tagged Queuing enabled.
Depth 32
Jun 3 09:55:02 geocentric kernel: Vendor: ZJCS Model: ZJCS2-36GB
Rev: S5BS
Jun 3 09:55:02 geocentric kernel: Type: Direct-Access
ANSI SCSI revision: 03
Jun 3 09:55:02 geocentric kernel: scsi0:A:4:0: Tagged Queuing enabled.
Depth 32
Jun 3 09:55:02 geocentric kernel: Vendor: Model:
Rev: S7Z0
Jun 3 09:55:02 geocentric kernel: Type: Direct-Access
ANSI SCSI revision: 03
Jun 3 09:55:02 geocentric kernel: scsi0:A:5:0: Tagged Queuing enabled.
Depth 32
Jun 3 09:55:02 geocentric kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI
HBA DRIVER, Rev 6.2.36
Jun 3 09:55:02 geocentric kernel: <Adaptec aic7899 Ultra160 SCSI
adapter>
Jun 3 09:55:02 geocentric kernel: aic7899: Ultra160 Wide Channel B,
SCSI Id=7, 32/253 SCBs
Jun 3 09:55:02 geocentric kernel:
Jun 3 09:55:02 geocentric kernel: SCSI device sda: 71687340 512-byte hdwr
sectors (36704 MB)
Jun 3 09:55:02 geocentric kernel: SCSI device sda: drive cache: write back
Jun 3 09:55:02 geocentric kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6
sda7 sda8 sda9 >
Jun 3 09:55:02 geocentric kernel: Attached scsi disk sda at scsi0, channel
0, id 0, lun 0
Jun 3 09:55:02 geocentric kernel: SCSI device sdb: 71687340 512-byte hdwr
sectors (36704 MB)
Jun 3 09:55:02 geocentric kernel: SCSI device sdb: drive cache: write back
Jun 3 09:55:02 geocentric kernel: sdb: sdb1
Jun 3 09:55:02 geocentric kernel: Attached scsi disk sdb at scsi0, channel
0, id 1, lun 0
Jun 3 09:55:02 geocentric kernel: SCSI device sdc: 71687340 512-byte hdwr
sectors (36704 MB)
Jun 3 09:55:02 geocentric kernel: SCSI device sdc: drive cache: write back
Jun 3 09:55:02 geocentric kernel: sdc: sdc1
Jun 3 09:55:02 geocentric kernel: Attached scsi disk sdc at scsi0, channel
0, id 2, lun 0
Jun 3 09:55:02 geocentric kernel: SCSI device sdd: 71687340 512-byte hdwr
sectors (36704 MB)
Jun 3 09:55:02 geocentric kernel: SCSI device sdd: drive cache: write back
Jun 3 09:55:02 geocentric kernel: sdd: sdd1
Jun 3 09:55:02 geocentric kernel: Attached scsi disk sdd at scsi0, channel
0, id 3, lun 0
Jun 3 09:55:02 geocentric kernel: SCSI device sde: 71687340 512-byte hdwr
sectors (36704 MB)
Jun 3 09:55:02 geocentric kernel: SCSI device sde: drive cache: write back
Jun 3 09:55:02 geocentric kernel: sde: sde1
Jun 3 09:55:02 geocentric kernel: Attached scsi disk sde at scsi0, channel
0, id 4, lun 0
Jun 3 09:55:02 geocentric kernel: SCSI device sdf: 71687340 512-byte hdwr
sectors (36704 MB)
Jun 3 09:55:02 geocentric kernel: SCSI device sdf: drive cache: write back
Jun 3 09:55:02 geocentric kernel: sdf: sdf1
Jun 3 09:55:02 geocentric kernel: Attached scsi disk sdf at scsi0, channel
0, id 5, lun 0
Jun 3 09:55:02 geocentric kernel: Attached scsi generic sg0 at scsi0,
channel 0, id 0, lun 0, type 0
Jun 3 09:55:02 geocentric kernel: Attached scsi generic sg1 at scsi0,
channel 0, id 1, lun 0, type 0
Jun 3 09:55:02 geocentric kernel: Attached scsi generic sg2 at scsi0,
channel 0, id 2, lun 0, type 0
Jun 3 09:55:02 geocentric kernel: Attached scsi generic sg3 at scsi0,
channel 0, id 3, lun 0, type 0
Jun 3 09:55:02 geocentric kernel: Attached scsi generic sg4 at scsi0,
channel 0, id 4, lun 0, type 0
Jun 3 09:55:02 geocentric kernel: Attached scsi generic sg5 at scsi0,
channel 0, id 5, lun 0, type 0
Jun 3 09:55:02 geocentric kernel: mice: PS/2 mouse device common for all
mice
Jun 3 09:55:02 geocentric kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 3 09:55:02 geocentric kernel: input: ImPS/2 Generic Wheel Mouse on
isa0060/serio1
Jun 3 09:55:02 geocentric kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 3 09:55:02 geocentric kernel: input: AT Translated Set 2 keyboard on
isa0060/serio0
Jun 3 09:55:02 geocentric kernel: md: raid5 personality registered as nr 4
Jun 3 09:55:02 geocentric kernel: raid5: measuring checksumming speed
Jun 3 09:55:02 geocentric kernel: 8regs : 1832.000 MB/sec
Jun 3 09:55:02 geocentric kernel: 8regs_prefetch: 1468.000 MB/sec
Jun 3 09:55:02 geocentric kernel: 32regs : 964.000 MB/sec
Jun 3 09:55:02 geocentric kernel: 32regs_prefetch: 896.000 MB/sec
Jun 3 09:55:02 geocentric kernel: pIII_sse : 1976.000 MB/sec
Jun 3 09:55:02 geocentric kernel: pII_mmx : 2484.000 MB/sec
Jun 3 09:55:02 geocentric kernel: p5_mmx : 2656.000 MB/sec
Jun 3 09:55:02 geocentric kernel: raid5: using function: pIII_sse (1976.000
MB/sec)
Jun 3 09:55:02 geocentric kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Jun 3 09:55:02 geocentric kernel: device-mapper: 4.0.0-ioctl (2003-06-04)
initialised: dm@uk.sistina.com
Jun 3 09:55:02 geocentric kernel: NET: Registered protocol family 2
Jun 3 09:55:02 geocentric kernel: IP: routing cache hash table of 8192
buckets, 64Kbytes
Jun 3 09:55:02 geocentric kernel: TCP: Hash tables configured (established
262144 bind 65536)
Jun 3 09:55:02 geocentric kernel: ip_conntrack version 2.1 (8191 buckets,
65528 max) - 304 bytes per conntrack
Jun 3 09:55:02 geocentric kernel: ip_tables: (C) 2000-2002 Netfilter core
team
Jun 3 09:55:02 geocentric kernel: ipt_recent v0.3.1: Stephen Frost
<sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
Jun 3 09:55:02 geocentric kernel: arp_tables: (C) 2002 David S. Miller
Jun 3 09:55:02 geocentric kernel: NET: Registered protocol family 1
Jun 3 09:55:02 geocentric kernel: NET: Registered protocol family 17
Jun 3 09:55:02 geocentric kernel: md: Autodetecting RAID arrays.
Jun 3 09:55:02 geocentric kernel: md: autorun ...
Jun 3 09:55:02 geocentric kernel: md: considering sde1 ...
Jun 3 09:55:02 geocentric kernel: md: adding sde1 ...
Jun 3 09:55:02 geocentric kernel: md: adding sdd1 ...
Jun 3 09:55:02 geocentric kernel: md: adding sdc1 ...
Jun 3 09:55:02 geocentric kernel: md: adding sdb1 ...
Jun 3 09:55:02 geocentric kernel: md: created md0
Jun 3 09:55:02 geocentric kernel: md: bind<sdb1>
Jun 3 09:55:02 geocentric kernel: md: bind<sdc1>
Jun 3 09:55:02 geocentric kernel: md: bind<sdd1>
Jun 3 09:55:02 geocentric kernel: md: bind<sde1>
Jun 3 09:55:02 geocentric kernel: md: running: <sde1><sdd1><sdc1><sdb1>
Jun 3 09:55:02 geocentric kernel: raid5: device sde1 operational as raid
disk 3
Jun 3 09:55:02 geocentric kernel: raid5: device sdd1 operational as raid
disk 2
Jun 3 09:55:02 geocentric kernel: raid5: device sdc1 operational as raid
disk 1
Jun 3 09:55:02 geocentric kernel: raid5: device sdb1 operational as raid
disk 0
Jun 3 09:55:02 geocentric kernel: raid5: allocated 5223kB for md0
Jun 3 09:55:02 geocentric kernel: raid5: raid level 5 set md0 active with 4
out of 5 devices, algorithm 2
Jun 3 09:55:02 geocentric kernel: RAID5 conf printout:
Jun 3 09:55:02 geocentric kernel: --- rd:5 wd:4 fd:1
Jun 3 09:55:02 geocentric kernel: disk 0, o:1, dev:sdb1
Jun 3 09:55:02 geocentric kernel: disk 1, o:1, dev:sdc1
Jun 3 09:55:02 geocentric kernel: disk 2, o:1, dev:sdd1
Jun 3 09:55:02 geocentric kernel: disk 3, o:1, dev:sde1
Jun 3 09:55:02 geocentric kernel: md: ... autorun DONE.
Jun 3 09:55:02 geocentric kernel: VFS: Mounted root (ext2 filesystem)
readonly.
Jun 3 09:55:02 geocentric kernel: Freeing unused kernel memory: 364k freed
Jun 3 09:55:02 geocentric kernel: Adding 1028152k swap on /dev/sda2.
Priority:-1 extents:1
Jun 3 09:55:02 geocentric kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
Jun 3 09:55:02 geocentric kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Jun 3 09:55:02 geocentric kernel: eth0: 0000:04:0c.0, 00:40:A0:00:1D:CD,
IRQ 16.
Jun 3 09:55:02 geocentric kernel: Receiver lock-up bug exists -- enabling
work-around.
Jun 3 09:55:02 geocentric kernel: Board assembly 540575-040, Physical
connectors present: RJ45
Jun 3 09:55:02 geocentric kernel: Primary interface chip i82555 PHY #1.
Jun 3 09:55:02 geocentric kernel: General self-test: passed.
Jun 3 09:55:02 geocentric kernel: Serial sub-system self-test: passed.
Jun 3 09:55:02 geocentric kernel: Internal registers self-test: passed.
Jun 3 09:55:02 geocentric kernel: ROM checksum self-test: passed
(0x04f4518b).
Jun 3 09:55:02 geocentric kernel: Receiver lock-up workaround activated.
Jun 3 09:55:02 geocentric kernel: Intel(R) PRO/1000 Network Driver -
version 5.2.30.1-k1
Jun 3 09:55:02 geocentric kernel: Copyright (c) 1999-2004 Intel
Corporation.
Jun 3 09:55:02 geocentric kernel: eth1: Intel(R) PRO/1000 Network
Connection
Jun 3 09:55:02 geocentric kernel: drivers/usb/core/usb.c: registered new
driver usbfs
Jun 3 09:55:02 geocentric kernel: drivers/usb/core/usb.c: registered new
driver hub
Jun 3 09:55:02 geocentric kernel: PCI: Setting latency timer of device
0000:00:1f.5 to 64
Jun 3 09:55:02 geocentric kernel: intel8x0_measure_ac97_clock: measured
49321 usecs
Jun 3 09:55:02 geocentric kernel: intel8x0: clocking to 48000
Jun 3 09:55:02 geocentric kernel: cdrom: open failed.
Jun 3 09:55:02 geocentric kernel: cdrom: open failed.
Jun 3 09:55:02 geocentric openvpn[384]: Current Parameter Settings:
Jun 3 09:55:02 geocentric openvpn[384]: config =
'/etc/openvpn/scc-wi.com.conf'
Jun 3 09:55:02 geocentric openvpn[384]: persist_config = DISABLED
Jun 3 09:55:02 geocentric openvpn[384]: persist_mode = 1
Jun 3 09:55:02 geocentric openvpn[384]: show_ciphers = DISABLED
Jun 3 09:55:02 geocentric openvpn[384]: show_digests = DISABLED
Jun 3 09:55:02 geocentric openvpn[384]: genkey = DISABLED
Jun 3 09:55:02 geocentric openvpn[384]: askpass = DISABLED
Jun 3 09:55:02 geocentric openvpn[384]: show_tls_ciphers = DISABLED
Jun 3 09:55:02 geocentric openvpn[384]: proto = 1
Jun 3 09:55:02 geocentric openvpn[384]: 103 variation(s) on previous 10
message(s) suppressed by --mute
Jun 3 09:55:02 geocentric openvpn[384]: OpenVPN 1.6.0 i386-pc-linux-gnu
[SSL] [LZO] [PTHREAD] built on May 10 2004
Jun 3 09:55:02 geocentric openvpn[384]: Static Encrypt: Cipher 'BF-CBC'
initialized with 128 bit key
Jun 3 09:55:02 geocentric openvpn[384]: Static Encrypt: Using 160 bit
message hash 'SHA1' for HMAC authentication
Jun 3 09:55:02 geocentric openvpn[384]: Static Decrypt: Cipher 'BF-CBC'
initialized with 128 bit key
Jun 3 09:55:02 geocentric openvpn[384]: Static Decrypt: Using 160 bit
message hash 'SHA1' for HMAC authentication
Jun 3 09:55:02 geocentric openvpn[384]: LZO compression initialized
Jun 3 09:55:02 geocentric kernel: Universal TUN/TAP device driver 1.5
(C)1999-2002 Maxim Krasnyansky
Jun 3 09:55:02 geocentric openvpn[384]: TUN/TAP device tap0 opened
Jun 3 09:55:02 geocentric openvpn[384]: /sbin/ifconfig tap0 192.168.0.1
netmask 255.255.255.0 mtu 1500 broadcast 192.168.0.255
Jun 3 09:55:02 geocentric openvpn[384]: Data Channel MTU parms [ L:1579
D:1579 EF:47 EB:19 ET:32 EL:0 ]
Jun 3 09:55:02 geocentric openvpn[384]: Local Options String: 'V3,dev-type
tap,link-mtu 1579,tun-mtu 1532,proto TCPv4_SERVER,ifconfig 192.168.0.0
255.255.255.0,comp-lzo,cipher BF-CBC,auth SHA1,keysize 128,secret'
Jun 3 09:55:02 geocentric openvpn[384]: Expected Remote Options String:
'V3,dev-type tap,link-mtu 1579,tun-mtu 1532,proto TCPv4_CLIENT,ifconfig
192.168.0.0 255.255.255.0,comp-lzo,cipher BF-CBC,auth SHA1,keysize
128,secret'
Jun 3 09:55:02 geocentric openvpn[384]: Local Options hash (VER=V3):
'3416032f'
Jun 3 09:55:02 geocentric openvpn[384]: Expected Remote Options hash
(VER=V3): 'f8d500f0'
Jun 3 09:55:02 geocentric openvpn[388]: PTHREAD support initialized
Jun 3 09:55:02 geocentric openvpn[388]: Listening for incoming TCP
connection on [undef]:5000
Jun 3 09:55:03 geocentric lpd[435]: restarted
Jun 3 09:55:05 geocentric xfs: ignoring font path element
/usr/lib/X11/fonts/cyrillic/ (unreadable)
Jun 3 09:55:05 geocentric xfs: ignoring font path element
/usr/lib/X11/fonts/CID (unreadable)
Jun 3 09:55:08 geocentric rpc.statd[591]: Version 1.0.6 Starting
Jun 3 09:55:08 geocentric rpc.statd[591]: statd running as root. chown
/var/lib/nfs/sm to choose different user
Jun 3 09:55:09 geocentric proftpd[598]: geocentric.scc-wi.com - ProFTPD
1.2.9 (stable) (built do mrt 22 18:28:32 CET 2001) standalone mode STARTUP
Jun 3 09:55:09 geocentric /usr/sbin/cron[601]: (CRON) INFO (pidfile fd = 3)
Jun 3 09:55:09 geocentric /usr/sbin/cron[602]: (CRON) STARTUP (fork ok)
Jun 3 09:55:09 geocentric /usr/sbin/cron[602]: (CRON) INFO (Running @reboot
jobs)
Jun 3 09:55:09 geocentric kernel: vmmon: module license 'unspecified'
taints kernel.
Jun 3 09:55:09 geocentric kernel: /dev/vmmon: Module vmmon: registered with
major=10 minor=165
Jun 3 09:55:09 geocentric kernel: /dev/vmmon: Module vmmon: initialized
Jun 3 09:55:09 geocentric kernel: vmnet: module license 'unspecified'
taints kernel.
Jun 3 09:55:09 geocentric kernel: /dev/vmnet: open called by PID 623
(vmnet-bridge)
Jun 3 09:55:09 geocentric kernel: /dev/vmnet: hub 0 does not exist,
allocating memory.
Jun 3 09:55:09 geocentric kernel: /dev/vmnet: port on hub 0 successfully
opened
Jun 3 09:55:09 geocentric kernel: bridge-eth0: enabling the bridge
Jun 3 09:55:09 geocentric kernel: bridge-eth0: up
Jun 3 09:55:09 geocentric kernel: bridge-eth0: already up
Jun 3 09:55:09 geocentric kernel: bridge-eth0: attached
Jun 3 09:55:09 geocentric kernel: /dev/vmnet: open called by PID 631
(vmnet-natd)
Jun 3 09:55:09 geocentric kernel: /dev/vmnet: hub 8 does not exist,
allocating memory.
Jun 3 09:55:09 geocentric kernel: /dev/vmnet: port on hub 8 successfully
opened
Jun 3 09:55:19 geocentric kernel: /dev/vmnet: open called by PID 664
(vmnet-netifup)
Jun 3 09:55:19 geocentric kernel: /dev/vmnet: port on hub 8 successfully
opened
Jun 3 09:55:20 geocentric vmnet-dhcpd: Internet Software Consortium DHCP
Server 2.0
Jun 3 09:55:20 geocentric vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998,
1999 The Internet Software Consortium.
Jun 3 09:55:20 geocentric vmnet-dhcpd: All rights reserved.
Jun 3 09:55:20 geocentric vmnet-dhcpd:
Jun 3 09:55:20 geocentric vmnet-dhcpd: Please contribute if you find this
software useful.
Jun 3 09:55:20 geocentric vmnet-dhcpd: For info, please visit
http://www.isc.org/dhcp-contrib.html
Jun 3 09:55:20 geocentric vmnet-dhcpd:
Jun 3 09:55:20 geocentric vmnet-dhcpd: Configured subnet: 172.16.206.0
Jun 3 09:55:20 geocentric vmnet-dhcpd: Setting vmnet-dhcp IP address:
172.16.206.254
Jun 3 09:55:20 geocentric vmnet-dhcpd: Recving on
VNet/vmnet8/172.16.206.0
Jun 3 09:55:20 geocentric kernel: /dev/vmnet: open called by PID 674
(vmnet-dhcpd)
Jun 3 09:55:20 geocentric vmnet-dhcpd: Sending on
VNet/vmnet8/172.16.206.0
Jun 3 09:55:20 geocentric kernel: /dev/vmnet: port on hub 8 successfully
opened
Jun 3 10:15:02 geocentric -- MARK --
Jun 3 10:17:01 geocentric /USR/SBIN/CRON[697]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 10:35:02 geocentric -- MARK --
Jun 3 10:55:02 geocentric -- MARK --
Jun 3 11:15:02 geocentric -- MARK --
Jun 3 11:17:01 geocentric /USR/SBIN/CRON[708]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 11:35:02 geocentric -- MARK --
Jun 3 11:55:02 geocentric -- MARK --
Jun 3 12:04:43 geocentric kernel: md: trying to hot-add sdf1 to md0 ...
Jun 3 12:04:43 geocentric kernel: md: bind<sdf1>
Jun 3 12:04:43 geocentric kernel: RAID5 conf printout:
Jun 3 12:04:43 geocentric kernel: --- rd:5 wd:4 fd:1
Jun 3 12:04:43 geocentric kernel: disk 0, o:1, dev:sdb1
Jun 3 12:04:43 geocentric kernel: disk 1, o:1, dev:sdc1
Jun 3 12:04:43 geocentric kernel: disk 2, o:1, dev:sdd1
Jun 3 12:04:43 geocentric kernel: disk 3, o:1, dev:sde1
Jun 3 12:04:43 geocentric kernel: disk 4, o:1, dev:sdf1
Jun 3 12:04:43 geocentric kernel: md: syncing RAID array md0
Jun 3 12:04:43 geocentric kernel: md: minimum _guaranteed_ reconstruction
speed: 1000 KB/sec/disc.
Jun 3 12:04:43 geocentric kernel: md: using maximum available idle IO
bandwith (but not more than 200000 KB/sec) for reconstruction.
Jun 3 12:04:43 geocentric kernel: md: using 128k window, over a total of
35840896 blocks.
Jun 3 12:15:02 geocentric -- MARK --
Jun 3 12:17:01 geocentric /USR/SBIN/CRON[734]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 12:28:48 geocentric kernel: md: md0: sync done.
Jun 3 12:28:48 geocentric kernel: RAID5 conf printout:
Jun 3 12:28:48 geocentric kernel: --- rd:5 wd:5 fd:0
Jun 3 12:28:48 geocentric kernel: disk 0, o:1, dev:sdb1
Jun 3 12:28:48 geocentric kernel: disk 1, o:1, dev:sdc1
Jun 3 12:28:48 geocentric kernel: disk 2, o:1, dev:sdd1
Jun 3 12:28:48 geocentric kernel: disk 3, o:1, dev:sde1
Jun 3 12:28:48 geocentric kernel: disk 4, o:1, dev:sdf1
Jun 3 12:40:07 geocentric gconfd (kahlemt-798): starting (version 2.6.1),
pid 798 user 'kahlemt'
Jun 3 12:40:07 geocentric gconfd (kahlemt-798): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only config source
at position 0
Jun 3 12:40:07 geocentric gconfd (kahlemt-798): Resolved address
"xml:readwrite:/home/kahlemt/.gconf" to a writable config source at position
1
Jun 3 12:40:07 geocentric gconfd (kahlemt-798): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only config source at
position 2
Jun 3 12:40:09 geocentric bonobo-activation-server (kahlemt-800): iid
OAFIID:BrokenNoType:20000808 has a NULL type
Jun 3 12:40:09 geocentric bonobo-activation-server (kahlemt-800): invalid
character '#' in iid 'OAFIID:This#!!%$iid%^$%_|~!OAFIID_ContainsBadChars'
Jun 3 12:55:02 geocentric -- MARK --
Jun 3 13:15:02 geocentric -- MARK --
Jun 3 13:17:01 geocentric /USR/SBIN/CRON[919]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 13:35:02 geocentric -- MARK --
Jun 3 13:55:02 geocentric -- MARK --
Jun 3 14:15:02 geocentric -- MARK --
Jun 3 14:17:01 geocentric /USR/SBIN/CRON[936]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 14:35:02 geocentric -- MARK --
Jun 3 14:55:02 geocentric -- MARK --
Jun 3 15:15:02 geocentric -- MARK --
Jun 3 15:17:01 geocentric /USR/SBIN/CRON[954]: (root) CMD ( run-parts
--report /etc/cron.hourly)
Jun 3 15:35:02 geocentric -- MARK --
Jun 3 15:55:02 geocentric -- MARK --
Please let me know if you have any ideas here. I am baffled.
Michael
Reply to: