Re: raid on bootup
On Tue, May 11, 2004 at 05:24:48PM +0100, Ciaran Johnston wrote:
> Antony Gelberg said:
> > Hi all,
> > I've got a system booting off /dev/hdc. I've just created a RAID-1 with
> > /dev/hda1 and /dev/hdb1. But on reboot, the RAID array is not
> > recognised. Partition types are fd. Any ideas?
> Are the partition types set to "Linux raid autodetect"? Check that the
Yep, that's fd.
> last line of the partition table says this, specifically. Otherwise I
> think you need to do a raidstart to get the raid daemon to start.
The raid daemon (mdadm) was running. It only did the business when I
issued a manual mdadm --assemble /dev/md0 /dev/hda1 /dev/hdb1.