Andrew Gilberto wrote:
Pigeon's pointing out that the system is not finding a 3c59x card, but rather a Lite-On 82c168. So you've apparently got two NICs in your box, or you're confused about which NIC you have. To activate the Lite-On, yes, you should be able to find the tulip driver in modconf.From: Pigeon <jah.pigeon@ukonline.co.uk> On Wed, Mar 24, 2004 at 05:53:30PM +0000, Andrew Gilberto wrote:> So, I've installed bf2.4 on my machine, but it's having problems seeing my 3c59x> network card. <snip> > 1. dmesg shows: > eth0: Lite-On 82c168 PNIC rev 32 at 0xe800, 00:A0:CC:D3:69:3E, IRQ 11. "grep -rsi 82c168 *" in the 2.4.18 source tree suggests you should try the tulip driver:Thanks for the reply. So, I'm not entirely sure what I should do with this information! Should I be able to find the tulip driver listed in modconf then? If so, that confuses me a little since the 3c59x driver is in modconf too, but fails to load.
-- Kent