Michael Robokoff wrote:
I have a machine with 2 ethernet interfaces installed. The systems
installed
with the Gigabit interface as eth0 and 100MB interface as eth1.
Can someone tell me how to change this so the 100MB interface is
eth0 and the gigabit interface is eth1?
Thanks
--Mike
edit /etc/network/interfaces
change eth1->eth0
and eth0->eth1
simple as that
there are other ways, like lspci and trying to figure out which way it
scans the bus. typically by putting another card between the network
cards, like a sound card
but the previous worked for me
:-)
stephen