modem not detected
hello all
i am not a member of the list. so i request you to mark a copy of your
replies to me also.
i have an hp machine that came preinstalled with win xp. i have recently
installed debian 3.0 on it and now it is a double boot computer.
in windows, it shows Generic SoftK56 Data Fax Voice Speakerphone as a
modem on COM3. PCI slot2 (bus 2, dev 10, function 0).
following is the output of lspci:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host
Bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge
(rev 03)
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge
(ICH2) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100
(rev 12)
00:1f.2 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB
(Hub A) (rev 12)
00:1f.3 SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 12)
00:1f.4 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB
(Hub B) (rev 12)
00:1f.5 Multimedia audio controller: Intel Corp. 82820 820 (Camino 2)
Chipset AC'97 Audio Controller (rev 12)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 Pro TF
02:08.0 Ethernet controller: Intel Corp. 82820 (ICH2) Chipset Ethernet
Controller (rev 03)
02:0a.0 Communication controller: Rockwell International HCF 56k
Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
output of wvdial is:
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 4800 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 4800 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 19200 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 19200 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 4800 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 4800 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 19200 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 19200 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Port Scan<*1>: S2 S3 ACM0 ACM1 ACM2 ACM3 ACM4 ACM5
Port Scan<*1>: ACM6 ACM7 ACM8 ACM9 ACM10 ACM11 ACM12 ACM13
Port Scan<*1>: ACM14 ACM15 USB0 USB1 USB2 USB3 USB4 USB5
Port Scan<*1>: USB6 USB7 USB8 USB9 USB10 USB11 USB12 USB13
Port Scan<*1>: USB14 USB15
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wvdial/
If you still have problems, send mail to wvdial-list@lists.nit.ca.
what is wrong? is there something missing?
thanks in advance,
sandip
Reply to: