Re: cdrecord and kernel 2.4 problem

[Hanno Böttcher <maillists@hannoboettcher.de>]

Nejc Novak wrote:

> John L Fjellstad wrote:
>
> > What's actually the problem?
> This is the problem. But i don't know what's wrang. According to the 
> cd-writing howto all modules are loaded properly. But i still get this 
> error. I believe it has something to do with running 2.4 kernel on 
> debian stable.
>
>
> Starting new track at sector: 0
> Track 01:   9 of 699 MB written (fifo  98%).cdrecord: Input/output 
> error. write_g1: scsi sendcmd: no error
> CDB:  2A 00 00 00 12 49 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.001s timeout 40s
>
> write track data: error after 9586688 bytes
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> Writing  time:   37.591s
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:   19.739s
> cdrecord: fifo had 215 puts and 152 gets.
> cdrecord: fifo was 0 times empty and 107 times full, min fill was 95%.
>
> Thank you for your help.
>
> Nejc
I'm just speculating, but are you sure you got the right driver used? 
AFAIK it's possible that you need to explicitly define the driver to 
use, if he's incapable of autorecognizing itself? Or maybe he's trying 
the wrong one?
Are you sure there is no other program/process accesing the drive while 
burning?
Did you read the cdrecord manpage about drivers? Maybe there are some 
compatibility lists arround, google for them.

I hope I got you an idea, the exact problem I can't tell either.