[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

cdrecord and kernel 2.4 problem



Hi! I need help on configuring cdrecord with kernel 2.4 on debian stable. I have properly configured scsi-ide and loaded all modules but...

soncek:/etc/default# cdrecord -v speed=16 dev=0,0,0 -dummy -data /home/film.iso
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'TEAC    '
Identifikation : 'CD-W516EB       '
Revision       : '1.0B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1674624 = 1635 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  699 MB
Total size:     803 MB (79:35.70) = 358178 sectors
Lout start:     803 MB (79:37/53) = 358178 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -12508 (97:15/17)
  ATIP start of lead out: 359845 (79:59/70)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 1667
Starting to write CD/DVD at speed 16 in dummy mode for single session.
Last chance to quit, starting dummy write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 9 of 699 MB written (fifo 98%).cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 12 49 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s

write track data: error after 9586688 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing  time:   37.591s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:   19.739s
cdrecord: fifo had 215 puts and 152 gets.
cdrecord: fifo was 0 times empty and 107 times full, min fill was 95%.


And here is my kernel:
soncek:/etc/default# uname -a
Linux soncek 2.4.18-1-686 #1 Sun Feb 1 03:55:30 MST 2004 i686 unknown

Thank you for your help!

Nejc



Reply to: