CD Burning problem
Hi all folks,
GNOME console
I met following problem in burning CD
# cdrecord dev=0,0,0 speed=12 blank=all -eject
Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg
Schillin g
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
cdrecord.mmap: No such file or directory. Cannot open '/dev/pg0'. Cannot open
SC SI driver.
cdrecord.mmap: For possible targets try 'cdrecord -scanbus'. Make sure you are
r oot.
cdrecord.mmap: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord.mmap: Also make sure that you have loaded the sg driver and the
driver for
cdrecord.mmap: SCSI hardware, eg. ide-scsi if you run IDE/ATAPI drives over
cdrecord.mmap: ide-scsi emulation. For more information, install the
cdrtools-do c
cdrecord.mmap: package and read /usr/share/doc/cdrecord/README.ATAPI.setup
However I could not locate 'README.ATAPI.setup'
# locate README.ATAPI.setup
# find / -name readme.atapi.setup
all no printout
# dvd=yes cdrecord dev=0,0,0 speed=12 blank=all -v -eject
Cdrecord-Clone 2.01a24 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg
Schillin g
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
cdrecord.mmap: No such file or directory. Cannot open '/dev/pg0'. Cannot open
SC SI driver.
cdrecord.mmap: For possible targets try 'cdrecord -scanbus'. Make sure you are
r oot.
cdrecord.mmap: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord.mmap: Also make sure that you have loaded the sg driver and the
driver for
cdrecord.mmap: SCSI hardware, eg. ide-scsi if you run IDE/ATAPI drives over
cdrecord.mmap: ide-scsi emulation. For more information, install the
cdrtools-do c
cdrecord.mmap: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
# apt-cache search cdrecord.nmap
No printout
Kindly advise how to proceed.
TIA
B.R.
Stephen Liu
Reply to: