Re: using old isa bus ethernet cards
On Mon, 22 Dec 2003 13:07:20 -0500, Debian User wrote:
> i did this but am still having no luck. part of my problem is that
> i am not sure which io address to use (or how to know which one is
> correct for the given isa slot). furthermore, the interrupt should
> be set. i do not see jumpers on the ethernet cards to set the irq.
>
>
> how can i be sure of the io address and irq?
As suggested earlier: get the driver disk for it. It will show as
'jumperless' or so, e.g.: => setting per software.
Those diskettes usually permit to set IRQs, I/Os and pnp/non-pnp
Since google doesn't turn up *anything* on LG82000, you might want to
recheck the chip (set) type.
HTH
Reply to: