Re: Installing modem

["Hoyt Bailey" <hoyt13@wiredok.com>]

I disabled com1 & com2 hardware ports in the BIOS and booted into Linux the
dmesg log concerning the serial ports is as follows:

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (12b9,1008,12b9,00d3)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS04 at port 0xd000 (irq = 19) is a 16550A

I noticed while in BIOS the only IRQ1 thru 14 are listed.  Does this matter?

After extracting dmesg, I returned to command line and issued the following:
echo "ADTD3633070" > /dev/ttyS3
echo "ADTD3633070" > /dev/ttyS4

Niether command resulted in any sound from the modem and no errors were
reported.

Regards;
Hoyt