raid1 and lilo second disk doesn't boot
Hello,
I have two scsi discs in a raid1 setup:
md1: sda1 and sdb1
md2: sda2 and sdb2
Filesystem Size Used Avail Use% Mounted on
/dev/md2 880M 452M 384M 55% /
/dev/md1 13M 2.7M 10M 21% /boot
The systems boots fine when sda or both disks are attached. When sda
is not attached the raid doesn't boot from sdb. I get LI 01 01 01 01 01...
When I boot from floppy with only the second disk attached everything
works ok.
schamper:/home/rudy# cat /etc/lilo.conf
lba32
boot=/dev/md1
raid-extra-boot=/dev/sda,/dev/sdb
root=/dev/md2
install=/boot/boot.b
map=/boot/map
vga=normal
delay=20
image=/vmlinuz
label = Linux
read-only
I used mdadm to setup the raid and have raid support compiled into the
kernel (NOT as module).
What did I do wrong in my lilo.conf?
Thank you ever so much.
--
Rudy Gevaert rudy@zeus.UGent.be
Web page http://www.webworm.org
GNU/Linux user and Savannah hacker http://savannah.gnu.org
"Many that live deserve death. And some that die deserve life. Can you
give it to them? Then do not be to eager to deal out death in
judgement."
- Gandalf, Lord of the Rings (J R R Tolkien)
Reply to: