Re: Routing
Ok cool!
Looking good:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
192.168.3.0 192.168.8.4 255.255.255.0 UG 0 0 0 eth0
10.1.0.0 192.168.8.4 255.255.255.0 UG 0 0 0 eth0
localnet * 255.255.255.0 U 0 0 0 eth0
217.149.32.0 * 255.255.240.0 U 0 0 0 eth1
default 217.149.34.113 0.0.0.0 UG 0 0 0 eth1
I can ping hosts on the 192.168.3.0/24 network, and the 10.1.0.0/24 network
and my own ofcourse. From the machine it self I can reach the Internet. One
more thing:
When I use the MS pptp client and login to the pptpd server on this machine
i can ping all networks from the client, but cannot reach the internet.
Pinging google.nl results in the name beeing resolved to the ip adress of
google.nl but the request don't ever reach google.nl...
One more route to add?
Thanks,
Mark
p.s.
Thanks for the enormous help!+
----- Original Message -----
From: "Kevin Buhr" <buhr@telus.net>
To: "Mark Maas" <mark@menem.mine.nu>
Cc: <debian-user@lists.debian.org>
Sent: Friday, September 05, 2003 9:38 AM
Subject: Re: Routing
> "Mark Maas" <mark@menem.mine.nu> writes:
> >
> > This is what my table looked like:
> >
> > Kernel IP routing table
> > Destination Gateway Genmask Flags Metric Ref Use
> > Iface
> > localnet * 255.255.255.0 U 0 0 0
eth0
> > 217.149.32.0 * 255.255.240.0 U 0 0 0
eth1
> > default 217.149.34.113 0.0.0.0 UG 0 0 0
eth1
> > default 192.168.8.4 0.0.0.0 UG 0 0 0
eth0
>
> Whoops... Sorry for that earlier blank reply. My finger slipped.
>
> I assume "localnet" here is 192.168.8.0 and that 192.168.8.4 is the
> gateway on the local LAN which you were successfully using to contact
> the other firms before bringing up "eth1".
>
> I'd suggest doing:
>
> route del default gw 192.168.8.4
>
> to get rid of that spurious extra default route and:
>
> route add -net 192.168.3.0/24 gw 192.168.8.4
> route add -net 10.1.0.0/24 gw 192.168.8.4
>
> to try and route the two other private LANs through the old gateway.
> Your final routing table will look like:
>
> localnet * 255.255.255.0 U 0 0 0
eth0
> 192.168.3.0 192.168.8.4 255.255.255.0 UG 0 0 0
eth0
> 10.1.0.0 192.168.8.4 255.255.255.0 UG 0 0 0
eth0
> 217.149.32.0 * 255.255.240.0 U 0 0 0
eth1
> default 217.149.34.113 0.0.0.0 UG 0 0 0
eth1
>
> To make this change permanent, assuming you're using
> "/etc/network/interfaces" and "eth0" is configured statically, you
> want to comment out its "gateway" line (which adds that incorrect
> default route) and add two "up" commands to statically route the two
> "special" networks through the old gateway, like so:
>
> auto eth0
> iface eth0 inet static
> address 192.168.8.whatever
> network 192.168.8.0
> netmask 255.255.255.0
> broadcast 192.168.8.255
> # gateway 192.168.8.4
> up route add -net 192.168.3.0/24 gw 192.168.8.4
> up route add -net 10.1.0.0/24 gw 192.168.8.4
>
> Is "eth1" a DHCP-configured ADSL modem or something? If so, it'll get
> the default route to 217.149.34.113 assigned automatically during the
> DHCP negotiation, so there's nothing to add for that.
>
> --
> Kevin <buhr@telus.net>
>
>
Reply to: