IPSEC reconnect problem
Hi,
i try to setup an freeswan tunnel. Everything works fine, both freeswan
server are connected
via pppoe and i can successfully establish the tunnel. I configured freeswan
with uniqueids=yes,
so i thought, if i reboot one machine, it must be automatic reconnect
(uniqueids) but it doesn't.
One side is connected via static ip and one via dynamic ip. I Also have an
entry in
/etc/ppp/ip-up.d/ipsec to start and in /etc/ppp/ip-down.d/ipsec to stop
ipsec.
What made i wrong?
Thanks in advance.
Here are my config files:
ipsec.conf
Side A: Side B:
config setup config setup
interfaces=%defaultroute interfaces=%defaultroute
klipsdebug=none klipsdebug=none
plutodebug=none plutodebug=none
plutoload=%search plutoload=%search
plutostart=%search plutostart=%search
uniqueids=yes uniqueids=yes
conn %default conn %default
keyingtries=0 keyingtries=0
type=tunnel type=tunnel
auth=esp auth=esp
esp=3des-sha1-69 esp=3des-sha1-69
authby=secret authby=secret
ikelifetime=1h ikelifetime=1h
keylife=1h keylife=1h
keyexchange=ike keyexchange=ike
pfs=no pfs=no
left=%defaultroute left=%defaultroute
leftsubnet=192.168.82.0/24 leftsubnet=192.168.81.0/24
leftid=@intern.home.de leftid=@intern.work.de
conn home2work
right=xx.dyndns.org right=yy.yy.yy.yy
rightsubnet=192.168.81.0/24 rightsubnet=192.168.82.0/24
rightid=@intern.work.de rightid=@intern.home.de
auto=start auto=start
ipsec.secrets Side A:
@intern.home.de @intern.work.de : PSK "secretkey"
ipsec.secrets Side B:
@intern.work.de @intern.home.de : PSK "secretkey"
Reply to: