SoundBlasterAWE64_alsa
I don't believe the kernel PnP is configuring the card properly. How do I
pass arguments to the kernel PnP?
Running unstable, gcc 2.95 for kernel and module compiles
Alsa and this card worked find in the 9.0-9.2 alsa versions using the
defaults
Somewhere in 9.3 and now in 9.4 the modules fail
PnP is off in the BIOS
PnP and IsaPNP compiled as modules
SoundCard support compiled as module
Debugging in Alsa turned on
isapnp: Scanning for PnP cards...
isapnp: SB audio device quirk - increasing port range
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
ALSA ../../alsa-kernel/isa/sb/sb16.c:313: pnp SB16: port=0x220, mpu
port=0x330,
fm port=0x388
ALSA ../../alsa-kernel/isa/sb/sb16.c:315: pnp SB16: dma1=1, dma2=5, irq=5
ALSA ../../alsa-kernel/isa/sb/sb16.c:336: pnp SB16: wavetable port=0x620
ALSA ../../alsa-kernel/isa/sb/sb_common.c:133: SB [0x220]: DSP chip found,
version = 4.16
ALSA ../../alsa-kernel/isa/sb/sb16.c:505: sbawe: fatal error - EMU-8000
synthesizer not detected at 0x620
ALSA ../../alsa-kernel/isa/sb/sb16.c:638: Sound Blaster 16 soundcard not
found or device busy
ALSA ../../alsa-kernel/isa/sb/sb16.c:640: In case, if you have non-AWE
card, try snd-sb16 module
/lib/modules/2.4.20/alsa/snd-sbawe.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20/alsa/snd-sbawe.o: insmod
/lib/modules/2.4.20/alsa/snd-sbawe.o failed
/lib/modules/2.4.20/alsa/snd-sbawe.o: insmod snd-sbawe failed
Reply to: