[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: Can not start x



Fred Bowker <mailto:f.bowker@btopenworld.com> schreef op zondag 8 juni 2003
15:17:

> Thanks a lot ive tried using dpkg-reconfigure xserver-xfree86 but
> still can not get anywhere. The graphics are onboard intel 810. heres
> the error log file  
> 
> Log File
> 
> This is a pre-release version of XFree86, and is not supported in any
> way.  Bugs may be reported to XFree86@XFree86.Org and patches
> submitted to fixes@XFree86.Org.  Before reporting bugs in pre-release
> versions, please check the latest version in the XFree86 CVS
> repository (http://www.XFree86.Org/cvs)   
> 
> XFree86 Version 4.1.0.1 / X Window System
> (protocol Version 11, revision 0, vendor release 6510)
> Release Date: 21 December 2001
> 	If the server is older than 6-12 months, or if your card is
> 	newer than the above date, look for a newer version before
> 	reporting problems.  (See http://www.XFree86.Org/FAQ)
> Build Operating System: Linux 2.4.17 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jun  8 14:55:11
> 2003 (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) |   |-->Monitor "Generic Monitor"
> (**) |   |-->Device "Generic Video Card"
> (**) |-->Input Device "Generic Keyboard"
> (**) Option "XkbRules" "xfree86"
> (**) XKB: rules: "xfree86"
> (**) Option "XkbModel" "pc104"
> (**) XKB: model: "pc104"
> (**) Option "XkbLayout" "en"
> (**) XKB: layout: "en"
> (==) Keyboard: CustomKeycode disabled
> (**) |-->Input Device "Configured Mouse"
> (**) |-->Input Device "Generic Mouse"
> (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
> 	Entry deleted from font path.
> (**) FontPath set to
> "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,
> /usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11
> /fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to
> "/usr/X11R6/lib/modules" (--) using VT number 7
> 
> (WW) Cannot open APM
> (II) Module ABI versions:
> 	XFree86 ANSI C Emulation: 0.1
> 	XFree86 Video Driver: 0.4
> 	XFree86 XInput driver : 0.2
> 	XFree86 Server Extension : 0.1
> 	XFree86 Font Renderer : 0.2
> (II) Loader running on linux
> (II) LoadModule: "bitmap"
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Bitmap
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) PCI: Probing config type using method 1
> (II) PCI: Config type is 1
> (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class
> 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7125 card 8086,4332 rev
> 03 class 03,00,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2418 card
> 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip
> 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI:
> 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
> (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class
> 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev
> 02 class 0c,05,00 hdr 00 (II) PCI: 01:08:0: chip 10ec,8029 card
> 0000,0000 rev 00 class 02,00,00 hdr 00 (II) PCI: 01:0a:0: chip
> 1274,1371 card 1274,1371 rev 09 class 04,01,00 hdr 00 (II) PCI: End
> of PCI scan (II) LoadModule: "scanpci" (II) Loading
> /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The
> 	XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) UnloadModule: "scanpci"
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (II) Host-to-PCI bridge:
> (II) PCI-to-ISA bridge:
> (II) PCI-to-PCI bridge:
> (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is
> set) (II) Bus 0 I/O range:
> 	[0] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> 	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> 	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x02 (VGA_EN is
> cleared)
> (II) Bus 1 I/O range:
> 	[0] -1 0	0x0000d000 - 0x0000dfff (0x1000) IX[B]
> (II) Bus 1 non-prefetchable memory range:
> 	[0] -1 0	0xff800000 - 0xff8fffff (0x100000) MX[B]
> (II) Bus 1 prefetchable memory range:
> 	[0] -1 0	0xf6a00000 - 0xf6afffff (0x100000) MX[B]
> (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is
> set)
> (II) Bus -1 I/O range:
> (II) Bus -1 non-prefetchable memory range:
> (II) Bus -1 prefetchable memory range:
> (--) PCI:*(0:1:0) Intel i810e rev 3, Mem @ 0xf8000000/26,
> 0xffa80000/19 (II) Addressable bus resource ranges are
> 	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
> 	[1] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> 	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[6] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Active PCI resource ranges:
> 	[0] -1 0	0xffa80000 - 0xffafffff (0x80000) MX[B](B)
> 	[1] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
> 	[2] -1 0	0x0000df00 - 0x0000dfff (0x100) IX[B]E
> 	[3] -1 0	0x0000df80 - 0x0000dfff (0x80) IX[B]E
> 	[4] -1 0	0x0000efa0 - 0x0000efbf (0x20) IX[B]E
> 	[5] -1 0	0x0000ef80 - 0x0000efff (0x80) IX[B]E
> 	[6] -1 0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (II) PCI I/O resource overlap reduced 0x0000df00 from 0x0000dfff to
> 0x0000df7f (II) PCI I/O resource overlap reduced 0x0000ef80 from
> 0x0000efff to 0x0000ef9f (II) Active PCI resource ranges after
> 	removing overlaps: [0] -1 0	0xffa80000 - 0xffafffff (0x80000)
> 	MX[B](B) [1] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
> 	[2] -1 0	0x0000df00 - 0x0000df7f (0x80) IX[B]E
> 	[3] -1 0	0x0000df80 - 0x0000dfff (0x80) IX[B]E
> 	[4] -1 0	0x0000efa0 - 0x0000efbf (0x20) IX[B]E
> 	[5] -1 0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
> 	[6] -1 0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (II) OS-reported resource ranges after removing overlaps with PCI:
> 	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[6] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> 	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1 0	0xffa80000 - 0xffafffff (0x80000) MX[B](B)
> 	[6] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
> 	[7] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[8] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[9] -1 0	0x0000df00 - 0x0000df7f (0x80) IX[B]E
> 	[10] -1 0	0x0000df80 - 0x0000dfff (0x80) IX[B]E
> 	[11] -1 0	0x0000efa0 - 0x0000efbf (0x20) IX[B]E
> 	[12] -1 0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
> 	[13] -1 0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (II) LoadModule: "GLcore"
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) LoadModule: "bitmap"
> (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Loading font Bitmap
> (II) LoadModule: "dbe"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Server Extension
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "ddc"
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "dri"
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "drm"
> (II) LoadModule: "drm"
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "extmod"
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Server Extension
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension FontCache
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) LoadModule: "freetype"
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.1.9
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font FreeType
> (II) LoadModule: "glx"
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading sub module "GLcore"
> (II) LoadModule: "GLcore"
> (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Loading extension GLX
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "pex5"
> (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> (II) Module pex5: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Server Extension
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension X3D-PEX
> (II) LoadModule: "record"
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.13.0
> 	Module class: XFree86 Server Extension
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension RECORD
> (II) LoadModule: "speedo"
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Speedo
> (II) LoadModule: "type1"
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Font Renderer
> 	ABI class: XFree86 Font Renderer, version 0.2
> (II) Loading font Type1
> (II) Loading font CID
> (II) LoadModule: "vbe"
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "xie"
> (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> (II) Module xie: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Server Extension
> 	ABI class: XFree86 Server Extension, version 0.1
> (II) Loading extension XIE
> (II) LoadModule: "i810"
> (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
> (II) Module i810: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 Video Driver
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	Module class: XFree86 XInput Driver
> 	ABI class: XFree86 XInput driver, version 0.2
> (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e,
> i815 (II) Primary Device is: PCI 00:01:0
> (--) Assigning device section with no busID to primary device
> (--) Chipset i810e found
> (II) resource ranges after xf86ClaimFixedResources() call:
> 	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1 0	0xffa80000 - 0xffafffff (0x80000) MX[B](B)
> 	[6] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
> 	[7] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[8] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[9] -1 0	0x0000df00 - 0x0000df7f (0x80) IX[B]E
> 	[10] -1 0	0x0000df80 - 0x0000dfff (0x80) IX[B]E
> 	[11] -1 0	0x0000efa0 - 0x0000efbf (0x20) IX[B]E
> 	[12] -1 0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
> 	[13] -1 0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> (II) resource ranges after probing:
> 	[0] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[1] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[2] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[3] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[4] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[5] -1 0	0xffa80000 - 0xffafffff (0x80000) MX[B](B)
> 	[6] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
> 	[7] 0 0	0x000a0000 - 0x000affff (0x10000) MS[B]
> 	[8] 0 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
> 	[9] 0 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
> 	[10] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[11] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[12] -1 0	0x0000df00 - 0x0000df7f (0x80) IX[B]E
> 	[13] -1 0	0x0000df80 - 0x0000dfff (0x80) IX[B]E
> 	[14] -1 0	0x0000efa0 - 0x0000efbf (0x20) IX[B]E
> 	[15] -1 0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
> 	[16] -1 0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> 	[17] 0 0	0x000003b0 - 0x000003bb (0xc) IS[B]
> 	[18] 0 0	0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (**) I810(0): Depth 16, (--) framebuffer bpp 16
> (==) I810(0): RGB weight 565
> (==) I810(0): Default visual is TrueColor
> (II) Loading sub module "vbe"
> (II) LoadModule: "vbe"
> (II) Reloading /usr/X11R6/lib/modules/libvbe.a
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
> (II) I810(0): initializing int10
> (II) I810(0): Primary V_BIOS segment is: 0xc000
> (II) I810(0): VESA BIOS detected
> (II) I810(0): VESA VBE Version 3.0
> (II) I810(0): VESA VBE Total Mem: 1024 kB
> (II) I810(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
> (II) I810(0): VESA VBE OEM Software Rev: 34.41
> (II) I810(0): VESA VBE OEM Vendor: Intel Corporation
> (II) I810(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
> (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Reloading /usr/X11R6/lib/modules/libddc.a
> (II) I810(0): VESA VBE DDC supported
> (II) I810(0): VESA VBE DDC Level 2
> (II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
> (II) I810(0): VESA VBE DDC read successfully
> (II) I810(0): Manufacturer: DEL  Model: 7002  Serial#: 1110459993
> (II) I810(0): Year: 2001  Week: 23
> (II) I810(0): EDID Version: 1.3
> (II) I810(0): Analog Display Input,  Input Voltage Level: 0.700/0.300
> V (II) I810(0): Sync:  Separate
> (II) I810(0): Max H-Image Size [cm]: horiz.: 30  vert.: 23
> (II) I810(0): Gamma: 2.87
> (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
> Display (II) I810(0): First detailed timing is preferred mode
> (II) I810(0): redX: 0.620 redY: 0.350   greenX: 0.290 greenY: 0.610
> (II) I810(0): blueX: 0.150 blueY: 0.065   whiteX: 0.283 whiteY: 0.297
> (II) I810(0): Supported VESA Video Modes:
> (II) I810(0): 720x400@70Hz
> (II) I810(0): 640x480@60Hz
> (II) I810(0): 640x480@75Hz
> (II) I810(0): 800x600@75Hz
> (II) I810(0): 1024x768@75Hz
> (II) I810(0): Manufacturer's mask: 0
> (II) I810(0): Supported Future Video Modes:
> (II) I810(0): #0: hsize: 1024  vsize 768  refresh: 85  vid: 22881
> (II) I810(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
> (II) I810(0): #2: hsize: 640  vsize 480  refresh: 85  vid: 22833
> (II) I810(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
> (II) I810(0): Supported additional Video Mode:
> (II) I810(0): clock: 78.8 MHz   Image Size:  300 x 225 mm
> (II) I810(0): h_active: 1024  h_sync: 1040  h_sync_end 1136
> h_blank_end 1312 h_border: 0 (II) I810(0): v_active: 768  v_sync: 769
> v_sync_end 772 v_blanking: 800 v_border: 0
> (II) I810(0): Serial No: 6E034166B0FY
> (II) I810(0): Monitor name: DELL  E771p
> (II) I810(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 70
> kHz, PixClock max 110 MHz (--) I810(0): Chipset: "i810e"
> (--) I810(0): Linear framebuffer at 0xF8000000
> (--) I810(0): IO registers at addr 0xFFA80000
> (EE) Unable to open /dev/agpgart (No such device)
> (**) I810(0): Will alloc AGP framebuffer: 1000 kByte
> (==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
> (II) I810(0): Generic Monitor: Using hsync range of 30.00-70.00 kHz
> (II) I810(0): Generic Monitor: Using vrefresh range of 50.00-160.00 Hz
> (II) I810(0): Clock range:  12.00 to 163.00 MHz
> (II) I810(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1024x768" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1152x864" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1280x960" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1280x960" (insufficient memory
> for mode)
> (II) I810(0): Not using default mode "1280x1024" (insufficient memory
> for mode) (II) I810(0): Not using default mode "1280x1024"
> (insufficient memory for mode) (II) I810(0): Not using default mode
> "1280x1024" (insufficient memory for mode) (II) I810(0): Not using
> default mode "1600x1200" (insufficient memory for mode) (II) I810(0):
> Not using default mode "1600x1200" (insufficient memory for mode)
> (II) I810(0): Not using default mode "1600x1200" (insufficient memory
> for mode) (II) I810(0): Not using default mode "1600x1200"
> (insufficient memory for mode) (II) I810(0): Not using default mode
> "1600x1200" (insufficient memory for mode) (II) I810(0): Not using
> default mode "1792x1344" (insufficient memory for mode) (II) I810(0):
> Not using default mode "1792x1344" (insufficient memory for mode)
> (II) I810(0): Not using default mode "1856x1392" (insufficient memory
> for mode) (II) I810(0): Not using default mode "1856x1392"
> (insufficient memory for mode) (II) I810(0): Not using default mode
> "1920x1440" (insufficient memory for mode) (II) I810(0): Not using
> default mode "1920x1440" (insufficient memory for mode) (II) I810(0):
> Not using default mode "1400x1050" (insufficient memory for mode)
> (II) I810(0): Not using default mode "1400x1050" (insufficient memory
> for mode) (II) I810(0): Not using mode "1024x768" (no mode of this
> name) (II) I810(0): Not using default mode "800x600" (no mode of this
> name) (--) I810(0): Virtual size is 640x480 (pitch 1024) (**)
> I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II)
> I810(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509
> -hsync -vsync (++) I810(0): DPI set to (100, 100) (II) Loading sub
> module "fb" (II) LoadModule: "fb" (II) Loading
> /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86
> 	Project" compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 ANSI C Emulation, version 0.1
> (II) Loading sub module "xaa"
> (II) LoadModule: "xaa"
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 1.0.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> 	compiled for 4.1.0.1, module version = 0.1.0
> 	ABI class: XFree86 Video Driver, version 0.4
> (II) do I need RAC?  No, I don't.
> (II) resource ranges after preInit:
> 	[0] 0 0	0xffa80000 - 0xffafffff (0x80000) MS[B]
> 	[1] 0 0	0xf8000000 - 0xfbffffff (0x4000000) MS[B]
> 	[2] -1 0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> 	[3] -1 0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[4] -1 0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[5] -1 0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[6] -1 0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[7] -1 0	0xffa80000 - 0xffafffff (0x80000) MX[B](B)
> 	[8] -1 0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
> 	[9] 0 0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> 	[10] 0 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> 	[11] 0 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> 	[12] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[13] -1 0	0x00000000 - 0x000000ff (0x100) IX[B]
> 	[14] -1 0	0x0000df00 - 0x0000df7f (0x80) IX[B]E
> 	[15] -1 0	0x0000df80 - 0x0000dfff (0x80) IX[B]E
> 	[16] -1 0	0x0000efa0 - 0x0000efbf (0x20) IX[B]E
> 	[17] -1 0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]E
> 	[18] -1 0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
> 	[19] 0 0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> 	[20] 0 0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> [drm] failed to load kernel module "i810"
> (II) I810(0): [drm] drmOpen failed
> (EE) I810(0): [dri] DRIScreenInit failed.  Disabling DRI.
> (==) I810(0): Write-combining range (0xf8000000,0x4000000)
> (II) I810(0): Setting dot clock to 36.0 MHz [ 0x10 0x1 0x40 ] [ 18 3
> 4 ] (II) I810(0): chose watermark 0x22007000: (tab.freq 36.0)
> 
> Fatal server error:
> AddScreen/ScreenInit failed for driver 0
> 
> 
> When reporting a problem related to a server crash, please send the
> full server output, not just the last messages. This can be found in
> the log file "/var/log/XFree86.0.log". Please report problems to
> submit@bugs.debian.org.   
> 
> This is the correct config file
> 
> ### BEGIN DEBCONF SECTION
> # XF86Config-4 (XFree86 server configuration file) generated by
> dexconf, the # Debian X Configuration tool, using values from the
> debconf database. # # Edit this file with caution, and see the
> XF86Config-4 manual page. # (Type "man XF86Config-4" at the shell
> prompt.) # # If you want your changes to this file preserved by
> dexconf, only make changes # before the "### BEGIN DEBCONF SECTION"
> line above, and/or after the # "### END DEBCONF SECTION" line below.
> # # To change things within the debconf section, run the command: #  
> dpkg-reconfigure xserver-xfree86 # as root.  Also see "How do I add
> custom sections to a dexconf-generated # XF86Config or XF86Config-4
> file?" in /usr/share/doc/xfree86-common/FAQ.gz.        
> 
> Section "Files"
> 	FontPath	"unix/:7100"			# local font
> server
> 	# if the local font server has problems, we can fall back on these
> 	FontPath	"/usr/lib/X11/fonts/misc"
> 	FontPath	"/usr/lib/X11/fonts/cyrillic"
> 	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
> 	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
> 	FontPath	"/usr/lib/X11/fonts/Type1"
> 	FontPath	"/usr/lib/X11/fonts/Speedo"
> 	FontPath	"/usr/lib/X11/fonts/100dpi"
> 	FontPath	"/usr/lib/X11/fonts/75dpi"
> EndSection
> 
> Section "Module"
> 	Load	"GLcore"
> 	Load	"bitmap"
> 	Load	"dbe"
> 	Load	"ddc"
> 	Load	"dri"
> 	Load	"extmod"
> 	Load	"freetype"
> 	Load	"glx"
> 	Load	"int10"
> 	Load	"pex5"
> 	Load	"record"
> 	Load	"speedo"
> 	Load	"type1"
> 	Load	"vbe"
> 	Load	"xie"
> EndSection
> 
> Section "InputDevice"
> 	Identifier	"Generic Keyboard"
> 	Driver		"keyboard"
> 	Option		"CoreKeyboard"
> 	Option		"XkbRules"	"xfree86"
> 	Option		"XkbModel"	"pc104"
> 	Option		"XkbLayout"	"en"
> EndSection
> 
> Section "InputDevice"
> 	Identifier	"Configured Mouse"
> 	Driver		"mouse"
> 	Option		"CorePointer"
> 	Option		"Device"		"/dev/psaux"
> 	Option		"Protocol"		"PS/2"
> 	Option		"Emulate3Buttons"	"true"
> 	Option		"ZAxisMapping"		"4 5"
> EndSection
> 
> Section "InputDevice"
> 	Identifier	"Generic Mouse"
> 	Driver		"mouse"
> 	Option		"SendCoreEvents"	"true"
> 	Option		"Device"		"/dev/input/mice"
> 	Option		"Protocol"		"ImPS/2"
> 	Option		"Emulate3Buttons"	"true"
> 	Option		"ZAxisMapping"		"4 5"
> EndSection
> 
> Section "Device"
> 	Identifier	"Generic Video Card"
> 	Driver		"i810"
> 	VideoRam	1000
> 	Option		"UseFBDev"		"true"
> EndSection
> 
> Section "Monitor"
> 	Identifier	"Generic Monitor"
> 	HorizSync	30-70
> 	VertRefresh	50-160
> 	Option		"DPMS"
> EndSection
> 
> Section "Screen"
> 	Identifier	"Default Screen"
> 	Device		"Generic Video Card"
> 	Monitor		"Generic Monitor"
> 	DefaultDepth	16
> 	SubSection "Display"
> 		Depth		1
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth		4
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth		8
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth		15
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth		16
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Depth		24
> 		Modes		"1024x768" "800x600" "640x480"
> 	EndSubSection
> EndSection
> 
> Section "ServerLayout"
> 	Identifier	"Default Layout"
> 	Screen		"Default Screen"
> 	InputDevice	"Generic Keyboard"
> 	InputDevice	"Configured Mouse"
> 	InputDevice	"Generic Mouse"
> EndSection
> 
> Section "DRI"
> 	Mode	0666
> EndSection
> 
> ### END DEBCONF SECTION
> 
> The problem I think is the line
> (EE) Unable to open /dev/agpgart (No such device)
> I don't know what this deveice is and why it is looking for it
> 
> Once again thanks for all of your help
> 
> 
> 

Section "Device"
 	Identifier	"Generic Video Card"
 	Driver		"i810"
 	VideoRam		1024
 	Option		"UseFBDev"		"false"
 EndSection

I have some _experience_ with nvidia cards, but not with intel cards, but
nvidia cards don't like the framebuffer device. Try it without the
framebuffer device. You also have installed the agpgart module, this is for
video cards in an AGP slot wich isn't neccesary because your video card is
onboard. You can use the Section "Device" above, it's already modified for
use w/o framebuffer.

HTH,

-WJ

Windows: Where do you want to go today?
MacOS:   Where do you want to be tomorrow?
Linux:   Are you coming or what?




Reply to: