On Wed, Jun 04, 2003 at 08:30:46PM -0400, Chris Metzler wrote: > On Wed, 4 Jun 2003 17:30:12 -0400 ScruLoose <scruloose+debuser@eastlink.ca> wrote: > > > > Hi all, > > > > Wanting to replace my prehistoric 10base-T card with something that can > > do 100, I bought myself a D-Link DFE-530TX and stuffed it into a free > > PCI slot. So I Googled for drivers and I keep being told that the card > > *is* supported, and uses the via-rhine drivers/module. But modprobe > > via-rhine fails. > > Just out of curiosity, are you using discover? I have a DFE-530TX+. > It has a different chipset, I know -- the rtl8139 set instead of the > Via-Rhine chipset -- but during boot, discover IDs it with no problem, > loads the correct module, passes along the correct i/o addy and irq, > etc. If you're not using discover, you may wanna give it a try. I wasn't using discover. Having installed it, I now have a couple of USB-related modules loading at boot time, but no change as far as the ethernet is concerned... dmesg doesn't say *anything* about an eth1 anywhere... modprobe via-rhine still dies w/ the same error message as before. If I just go ahead and add an eth1 section manually in /etc/network/interfaces and try ifup eth1, it (not surprisingly) dies, saying "eth1: ERROR while getting interface flags: No such device" lspci -v says this about my new card: 00:10.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3106 (rev 86) Subsystem: D-Link System Inc: Unknown device 1403 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at d800 [size=256] Memory at d9010000 (32-bit, non-prefetchable) [size=256] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 2 So... What do I try next? -- ,-----------------------------------------------------------------------------. > -ScruLoose- | All your base are belong to us! < > Please do not | - "Cats" from Zero Wing < > reply off-list. | < `-----------------------------------------------------------------------------'
Attachment:
pgpD74RgP40Hk.pgp
Description: PGP signature