Hello I have a SB51G Shuttle barebone with an integrated Intel I845GE graphic controler and an ATI Radeon 9100 in the AGP slot. The installation of Debian 3.0 failed when I configured the X server. I compiled the kernel with agp, drm and dri support for radeon. I also installed the ATI fglrx drivers for Xfree 4.1.0. In any case when I launch the Xserver I get a "no devices found". However I read that RedHat 8.0 works fine on the SB51G this this should not be a hardware compatibility problem. Has anybody an idea of what is happening? The dmesg, XFree86.0.log and lspci files are joined to this email. Thanks Cartusien ___________________________________________________________ Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français ! Yahoo! Mail : http://fr.mail.yahoo.com
Linux version 2.4.20 (root@debian) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 Fri May 9 13:09:53 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 0000000008000000 (usable) 0MB HIGHMEM available. 128MB LOWMEM available. On node 0 totalpages: 32768 zone(0): 4096 pages. zone(1): 28672 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=Linux ro root=306 mem=128M pci=bios,biosirq Initializing CPU#0 Detected 2004.605 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3997.69 BogoMIPS Memory: 127196k/131072k available (1157k kernel code, 3488k reserved, 504k data, 72k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: L1 I cache: 0K, L1 D cache: 8K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb5d0, last bus=2 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 02:06.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd NTFS driver v1.1.22 [Flags: R/O] Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Device 00:1f.1 not available because of resource collisions PCI: Found IRQ 11 for device 00:1f.1 PCI: Sharing IRQ 11 with 02:06.0 ICH4: BIOS setup was incomplete. ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 90845D4, ATA DISK drive hdc: Maxtor 6Y080L0, ATA DISK drive hdd: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c02d9724, I/O limit 4095Mb (mask 0xffffffff) hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63, UDMA(33) blk: queue c02d9a88, I/O limit 4095Mb (mask 0xffffffff) hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(100) hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hdc: [PTBL] [9964/255/63] hdc1 hdc2 FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 11 for device 02:06.0 PCI: Sharing IRQ 11 with 00:1f.1 eth0: RealTek RTL8139 Fast Ethernet at 0xc880d000, 00:30:1b:ad:a4:b9, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139C' Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 96M agpgart: Detected Intel i845G chipset agpgart: AGP aperture is 64M @ 0xe0000000 [drm] AGP 0.99 on Unknown @ 0xe0000000 64MB [drm] Initialized radeon 1.1.1 20010405 on minor 0 es1371: version v0.30 time 13:11:16 May 9 2003 usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 usb.c: registered new driver acm acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 72k freed Adding Swap: 1028120k swap-space (priority -1) NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Attachment:
XFree86.0.log
Description: XFree86.0.log
00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 03) 00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 03) 00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 82) 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02) 00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 02) 00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02) 00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 514d 02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) 02:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. OHCI Compliant IEEE 1394 Host Controller (rev 46)