Re: host-to-host usb
Sharninder wrote:
I am afraid that maybe the USB Link Cable I am using is not supported.
Is there anything else I could do, some page that would give me some
info on usb different drivers. I looked at Linux USB, but nothing
there.
i don't see why your usb link cable is not supported .. i mean it's
just a cable and USB is supported pretty well under linux now.
Sharninder Singh
National Institute Of Management, Calcutta
--------------------------------------------------
'M.C.S.E - Minesweeper Consultant & Solitaire Expert'
.
Thanks Sharninder,
you gave me some faith. In fact I've been searching and I foung that it
really should work (Genesys Logic GL620). Although it only says
(linux-usb-users) taht it works and that it is slow and that you have to
compile uhci from source. This is pretty confusing for me. I got uhci
source from Linux USB, but there is no easy ./configure, make, make
install or something like that, no INSTALL or README, which means taht I
don't know what to do, ehm ehm. But I have posted my problem to
linux-usb-users, so maybe some of them will know.
Anyway I still hope for some help, my /var/log/syslog still says:
Apr 15 12:59:16 woody kernel: hub.c: new USB device 00:11.3-2, assigned
address 5
Apr 15 12:59:16 woody kernel: usb.c: USB device 5 (vend/prod
0x5e3/0x501) is not claimed by any active driver.
Apr 15 12:59:19 woody pppoe[624]: Bogus PPPoE length field (50)
Apr 15 12:59:19 woody usb.agent: ... no modules for USB product 5e3/501/383
and lsmod:
Module Size Used by Tainted: P
nvidia 1545568 10 (autoclean)
bsd_comp 3992 0 (autoclean)
ehci-hcd 14888 0 (unused)
usbnet 10722 0 (unused)
printer 7712 0 (unused)
dc2xx 3200 0 (unused)
ppp_deflate 2968 0
zlib_deflate 17976 0 [ppp_deflate]
ppp_async 6976 1
i2c-proc 6288 0 (unused)
i2c-dev 3716 0 (unused)
ip_gre 7680 0 (unused)
usbkbd 2940 0 (unused)
usb-uhci 22412 0 (unused)
and lspci -a:
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
Subsystem: Asustek Computer, Inc. A7V333 Mainboard
Flags: bus master, 66Mhz, medium devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d6000000-d7dfffff
Prefetchable memory behind bridge: d7f00000-dfffffff
Capabilities: [80] Power Management version 2
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Flags: bus master, stepping, medium devsel, latency 32, IRQ 10
I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) (prog-if
20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8080
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at d5800000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:10.0 Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 25)
Subsystem: National Datacomm Corp: Unknown device 8110
Flags: bus master, stepping, fast Back2Back, medium devsel,
latency 32, IRQ 5
I/O ports at b800 [size=256]
Memory at d5000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=256K]
Capabilities: [44] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus
Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Flags: bus master, medium devsel, latency 32
I/O ports at b400 [size=16]
Capabilities: [c0] Power Management version 2
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808c
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at a800 [size=32]
Capabilities: [80] Power Management version 2
I really don't know why it doesn't work
Thanks
Petr
Reply to: