Re: Debian not seeing sound card

To: Rus Foster <rghf@fsck.me.uk>
Cc: debian-user@lists.debian.org
Subject: Re: Debian not seeing sound card
From: cmustard <cmustard@nyc.rr.com>
Date: Wed, 9 Apr 2003 21:06:35 -0400
Message-id: <[🔎] 20030410010635.GA2641@nyc.rr.com>
In-reply-to: <[🔎] 20030409080930.M15334@thor.65535.net>
References: <[🔎] 20030409075424.GA1675@nyc.rr.com> <[🔎] 20030409080930.M15334@thor.65535.net>
oh yeah, forgot about that, thanks, well this is actually
good news debian does see it correctly, how come the driver
wont take?

<cmustard ~/content>$ sudo lspci -vv > LSPCI
<cmustard ~/content>$ cat LSPCI
00:00.0 Host bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4] (rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 16
	Region 0: Memory at 50000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=7 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=<none>

00:01.0 PCI bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4 AGP] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: 40000000-410fffff
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 14)
	Subsystem: Unknown device 0011:0000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66
	Region 4: I/O ports at 1c80 [size=16]

00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 06) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66, cache line size 08
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at 1c40 [size=32]

00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 06) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66, cache line size 08
	Interrupt: pin D routed to IRQ 11
	Region 4: I/O ports at 1c60 [size=32]

00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 10)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:08.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) (prog-if 00 [VGA])
	Subsystem: STB Systems Inc Nitro 3D
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1000ns min, 63750ns max)
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at 44000000 (32-bit, non-prefetchable) [size=64M]
	Expansion ROM at <unassigned> [disabled] [size=64K]

00:09.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
	Subsystem: Accton Technology Corporation EN-1207D Fast Ethernet Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 1000 [size=256]
	Region 1: Memory at 41100000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 1
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Multimedia audio controller: Avance Logic Inc. ALS4000 Audio Chipset
	Subsystem: Avance Logic Inc. ALS4000 Audio Chipset
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at 2000 [size=128]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0b.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
	Subsystem: Accton Technology Corporation EN-1207D Fast Ethernet Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 1400 [size=256]
	Region 1: Memory at 41200000 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0d.0 Multimedia audio controller: ESS Technology ES1988 Allegro-1 (rev 10)
	Subsystem: Compaq Computer Corporation: Unknown device b207
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 1800 [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i7 (rev 5c) (prog-if 00 [VGA])
	Subsystem: Compaq Computer Corporation: Unknown device b1ab
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin A routed to IRQ 3
	Region 0: Memory at 40000000 (32-bit, non-prefetchable) [disabled] [size=8M]
	Region 1: Memory at 41000000 (32-bit, non-prefetchable) [disabled] [size=128K]
	Region 2: Memory at 40800000 (32-bit, non-prefetchable) [disabled] [size=8M]
	Expansion ROM at <unassigned> [disabled] [size=64K]
	Capabilities: [80] AGP version 1.0
		Status: RQ=32 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
	Capabilities: [90] Power Management version 1
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-



Rus Foster (rghf@fsck.me.uk) said:
> On Wed, 9 Apr 2003, cmustard wrote:
> 
> > Hello fellow debs,
> >
> > I just installed a basic cheap sound card. a compusa $20 'Avance Logic als 4000'.
> 
> Could you post lspci please as that will give us some more detail
> 
> Rus
> --
> www: http://www.65535.net       | "More bits for your byte"
> community: http://www.65535.org | MSNM: support@65535.net
> e: rghf@65535.net               | Hosting - Shell Accounts
> t: +44 (0) 7092016595           | Virtual Servers from $25/mo
Reply to:
References:
- Debian not seeing sound card
  - From: cmustard <cmustard@nyc.rr.com>
- Re: Debian not seeing sound card
  - From: Rus Foster <rghf@fsck.me.uk>
Prev by Date: RE: OT: Oregon HB 2892 out of committee
Next by Date: Help with mouse
Previous by thread: Re: Debian not seeing sound card
Next by thread: broken CD in apt-get
Index(es):
- Date
- Thread