[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Gimp Print Problem



On Sat, Feb 01, 2003 at 09:01:43PM -0500, Jerome Acks Jr wrote:
> On Sat, Feb 01, 2003 at 10:15:15AM -0500, Thomas H. George wrote:
> > Embarassed.  Part of the problem was a defective ink cartridge.  
> > 
> > 	lp /usr/share/cups/data/testprint.ps
> > 
> > is now ok.  But termial problem persists.  lp printtest prints nothing
> > and generates the error_log previously reported.  printtest is a one
> > line of plain text in a file produced by vi.  I also tried copying dmesg to a
> > file and trying to print that file with lp, again with no output.
> 
> If you ran "gs printtest", I think you will get a similar error
> message. Cupsys seems to be passing the file to gs-esp without first
> converting it to postscript. Your cups mimetypes may not be configured
> correctly. 
> 
> What does "file printtest" report?

ASCII text
> 
> Check /etc/cups/mime.convs; it should have section that reads:
> 
> # PostScript filters
> #
> 
> application/pdf         application/postscript  33      pdftops
> application/postscript  application/vnd.cups-postscript 66      pstops
> application/vnd.hp-HPGL application/postscript  66      hpgltops
> image/*                 application/vnd.cups-postscript 66      imagetops
> application/x-cshell    application/postscript  33      texttops
> application/x-perl      application/postscript  33      texttops
> application/x-shell     application/postscript  33      texttops
> text/plain              application/postscript  33      texttops
> text/html               application/postscript  33      texttops

This section is present
> 
> 
> The "texttops" filter should be located: /usr/lib/cups/filter/texttops

This filter is present
> 
> Also, Check /etc/cups/mime.types; in the section
> "Text files...", you should have an entry:
> 
> text/plain                      txt printable(0,1024)

There was no such section.  I tried adding one, stopping and restarting
cupsys then trying lp printtest - again, nothing printed and the
error_log looks the same.  Perhaps my addition was incomplete or
incorrect.  I'm inserting the mime.convs file.

Tom George


#
# "$Id: mime.convs,v 1.16 2002/04/23 17:54:04 mike Exp $"
#
#   MIME converts file for the Common UNIX Printing System (CUPS).
#
#   Copyright 1997-2002 by Easy Software Products.
#
#   These coded instructions, statements, and computer programs are the
#   property of Easy Software Products and are protected by Federal
#   copyright law.  Distribution and use rights are outlined in the file
#   "LICENSE.txt" which should have been included with this file.  If this
#   file is missing or damaged please contact Easy Software Products
#   at:
#
#       Attn: CUPS Licensing Information
#       Easy Software Products
#       44141 Airport View Drive, Suite 204
#       Hollywood, Maryland 20636-3111 USA
#
#       Voice: (301) 373-9603
#       EMail: cups-info@cups.org
#         WWW: http://www.cups.org
#

########################################################################
#
# Format of Lines:
#
#   source/type destination/type cost filter
#
# General Notes:
#
#   The "cost" field is used to find the least costly filters to run
#   when converting a job file to a printable format.
#
#   All filters *must* accept the standard command-line arguments
#   (job-id, user, title, copies, options, [filename or stdin]) to
#   work with CUPS.
#

########################################################################
#
# PostScript filters
#

application/pdf		application/postscript	33	pdftops
application/postscript	application/vnd.cups-postscript	66	pstops
application/vnd.hp-HPGL	application/postscript	66	hpgltops
image/*			application/vnd.cups-postscript	66	imagetops
application/x-cshell	application/postscript	33	texttops
application/x-perl	application/postscript	33	texttops
application/x-shell	application/postscript	33	texttops
text/plain		application/postscript	33	texttops
text/html		application/postscript	33	texttops

########################################################################
#
# Form filter...
#
# This filter does not currently exist, but the file format is defined
# in the IDD and registered with the IANA for future use...
#

#application/vnd.cups-form application/vnd.cups-postscript 33 formtops

########################################################################
#
# Raster filters...
#

image/*			application/vnd.cups-raster	100	imagetoraster

# pstoraster is now part of ESP Ghostscript...
#application/vnd.cups-postscript	application/vnd.cups-raster	100	pstoraster

########################################################################
#
# Text Files
# 
# Added by THG
#

text/plain		txt printable(0,1024)


########################################################################
#
# Raw filter...
#
# Uncomment the following filter and the application/octet-stream type
# in mime.types to allow printing of arbitrary files without the -oraw
# option.
#

#application/octet-stream	application/vnd.cups-raw	0	-

#
# End of "$Id: mime.convs,v 1.16 2002/04/23 17:54:04 mike Exp $".
#

> 
> -- 
> Jerome



Reply to: