Re: Using a IDE CD-RW with a SCSI Hard Drive

[Jamin W.Collins <jcollins@asgardsrealm.net>]

On Wed, 10 Jul 2002 15:21:55 -0400
"Robert James Kaes" <rjkaes@flarenet.com> wrote:

> On Wed, 10 Jul 2002, Jamin W. Collins wrote:
> > On Wed, 10 Jul 2002 15:03:23 -0400
> > "Robert James Kaes" <rjkaes@flarenet.com> wrote:
> > 
> > > It only lists the first line:
> > > 
> > > scsi1 : SCSI host adapter emulation for IDE ATAPI devices
> > 
> > Would you mind sending me (or posting it to the list) your
> > /var/log/dmesg file?
> 
> /var/log/dmesg below:
(snip)
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx PIIX4: IDE controller on PCI bus 00 dev 21
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
> scsi1 : SCSI host adapter emulation for IDE ATAPI devices

Not sure what the cause is but from the start of the ide entries to your
ide-scsi notification, there is no indication of any drives being found. 
In my dmesg log, I see the following:

ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400EB-00CPF0, ATA DISK drive
hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive
hdd: SONY CD-RW CRX140E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15

Perhaps this is why the emulation isn't working?  What modules are loaded
after a normal startup?

-- 
Jamin W. Collins


-- 
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org