Re: Using a IDE CD-RW with a SCSI Hard Drive
On Wed, 10 Jul 2002, Jamin W. Collins wrote:
> On Wed, 10 Jul 2002 15:03:23 -0400
> "Robert James Kaes" <rjkaes@flarenet.com> wrote:
>
> > It only lists the first line:
> >
> > scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>
> Would you mind sending me (or posting it to the list) your /var/log/dmesg
> file?
/var/log/dmesg below:
Linux version 2.4.18-686 (herbert@gondolin) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Apr 14 11:32:47 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=Linux ro root=806 ide-scsi=hda
Initializing CPU#0
Detected 267.275 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 532.48 BogoMIPS
Memory: 123952k/131072k available (811k kernel code, 6736k reserved, 231k data, 212k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0080fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After vendor init, caps: 0080fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0080fbff 00000000 00000000 00000000
CPU: Common caps: 0080fbff 00000000 00000000 00000000
CPU: Intel Pentium II (Klamath) stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 267.2765 MHz.
..... host bus clock speed is 66.8188 MHz.
cpu: 0, clocks: 668188, slice: 334094
CPU0<T0:668176,T1:334080,D:2,S:334094,C:668188>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0510, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:04.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3160 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 3160k freed
VFS: Mounted root (cramfs filesystem).
Journalled Block Device driver loaded
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 12 for device 00:0b.0
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 2940A Ultra SCSI adapter>
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
Vendor: QUANTUM Model: FIREBALL ST4.3S Rev: 0F0C
Type: Direct-Access ANSI SCSI revision: 02
scsi0:A:6:0: Tagged Queuing enabled. Depth 8
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
(scsi0:A:6): 20.000MB/s transfers (20.000MHz, offset 15)
SCSI device sda: 8471232 512-byte hdwr sectors (4337 MB)
Partition check:
/dev/scsi/host0/bus0/target6/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 >
cramfs: wrong magic
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
change_root: old root has d_count=2
Freeing unused kernel memory: 212k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 248968k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,6), internal journal
Real Time Clock Driver v1.10e
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 12 for device 00:09.0
PCI: Sharing IRQ 12 with 00:04.2
eth0: RealTek RTL-8029 found at 0xd000, IRQ 12, 00:60:67:4B:23:77.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
isapnp: Scanning for PnP cards...
isapnp: Card 'PnP Sound Chip'
isapnp: 1 Plug & Play card detected total
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: PnP Sound Chip detected
sb: ALS110 isapnp panic: opl3 device not found
sb: ISAPnP reports 'PnP Sound Chip' at i/o 0x220, irq 5, dma 3, 1
SB 4.02 detected OK (220)
SB16: Bad or missing 16 bit DMA channel
sb: 1 Soundblaster PnP card(s) found.
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on sd(8,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
--
------------------------------------------------------------------
Robert James Kaes --- Flarenet Inc. --- (519) 426-3782
http://www.flarenet.com/
* Putting the Service Back in Internet Service Provider *
------------------------------------------------------------------
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: