MPlayer
Hello,
I have compiled the MPlayer in my Debian Machine, and was fine... But
when i try run it, (mplayer <file.mpg>, nothing appears. Only messages
about permission denied in some places and .mplayer configuration
faults. But is my first time, how can i have the mplayer profile?
here is the output:
MPlayer 0.90pre4-2.95.4 (C) 2000-2002 Arpad Gereoffy (see DOCS!)
CPU vendor name: AuthenticAMD max cpuid level: 1
CPU: Advanced Micro Devices Athlon TB Thunderbird (Type: 6, Stepping: 2)
extended cpuid-level: 6
CPUflags: Type: 6 MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Compiled for x86 CPU with features: MMX MMX2 3DNow 3DNowEx
Reading /home/me/.mplayer/codecs.conf: can't open
'/home/me/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 34 audio & 92 video codecs
font: can't open file: /home/me/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Linux RTC init error: Permission denied
Using usleep() timing
Can't open input config file /home/me/.mplayer/input.conf : No such file
or directory
Falling back on default (hardcoded) config
Playing misc/videos/hochzeit.mpg
header block 1 size: 0
Detected MPEG-PS file format!
VIDEO: MPEG1 352x288 (aspect 8) 25.00 fps 1437.5 kbps (179.7
kbyte/s)
[V] filefmt:2 fourcc:0x10000001 size:352x288 fps:25.00 ftime:=0.0400
Detected audio codec: [mp3] drv:1 (MPEG layer-2, layer-3)
Selecting Audio Decoder: [mp3lib] MPEG layer-2, layer-3
mp3lib: made decode tables with MMX optimization
init layer2&3 finished, tables done
mp3lib: using 3DNow!Ex optimized decore!
MPEG 1.0, Layer II, 44100 Hz 224 kbit Stereo, BPF: 731
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: srate=44100 chans=2 bps=2 sfmt=0x10 ratio: 28000->176400
fbdev: Can't open /dev/fb0: Permission denied
Error opening/initializing the selected video_out (-vo) device!
*** free_stream() called ***
Exiting... (End of file)
thanks!!
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: