HELP! Trident 4DWave/SiS 7018/Ali 5451 PCI Audio doesn't work
I've been unable to get my sound card to work, and was hoping for some help.
All the devices appear okay, all the modules seem to load, no messages in
syslog, but when I:
cat sound.au > /dev/dsp
it just sits there (until I kill it), and I get no sound whatsoever.
Here's all the relavant info I can think of, please let me know if you need
more. I'm stumped and don't know what to do next. Can anyone help?
==========
Machine is a Toshiba Satellite Pro 6000
#uname -a
Linux Sean 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002 i686 unknown
[This is Debian: Woody]
==========
#l /dev/dsp
crw-rw-rw- 1 root audio 14, 3 Jul 5 2000 /dev/dsp
#l /dev/audio
crw-rw-rw- 1 root audio 14, 4 Jul 5 2000 /dev/audio
#l /dev/mixer
crw-rw-rw- 1 root audio 14, 0 Jul 5 2000 /dev/mixer
#l /dev/sndstat
crw-rw---- 1 root audio 14, 6 Jul 5 2000 /dev/sndstat
[ I changed the permissions on dsp, audio, and mixer to 666 just to make sure
that wasn't my problem.]
==========
Relavant info from /var/syslog at startup: {dmesg at end of this e-mail}
Trident 4DWave/SiS 7018/Ali 5451 PCI Audio, version 0.14.6a, 11:53:38 Apr 20
2002
trident: ALi Audio Accelerator found at IO 0xed00, IRQ 11
ac97_codec: AC97 Audio codec, vendor id1: 0x414b, id2: 0x4d02 (Unknown)
ac97_codec: AC97 Modem codec, vendor id1: 0x5349, id2: 0x4c27 (Unknown)
==========
#cat /dev/sndstat
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux Sean 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002 i686
Config options: 0
Installed drivers:
Card config:
Audio devices:
Synth devices:
Midi devices:
Timers:
0: System clock
Mixers:
==========
# cat /proc/dma
4: cascade
==========
# cat /proc/interrupts
CPU0
0: 518962 XT-PIC timer
1: 9201 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 0 XT-PIC 3c589_cs
8: 3 XT-PIC rtc
11: 52602 XT-PIC ALi Audio Accelerator, i82365, orinoco_cs
12: 234621 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 306186 XT-PIC ide0
15: 5 XT-PIC ide1
NMI: 0
==========
#cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0100-013f : orinoco_cs
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(set)
0300-030f : 3c589_cs
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(set)
ed00-edff : ALi Audio Accelerator
eff0-eff7 : ide0
eff8-efff : ide1
df099000-df09901f : Intel Speedo3 Ethernet
==========
# lsmod
Module Size Used by
serial_cs 5408 0 (unused)
3c589_cs 8544 0 (unused)
orinoco_cs 4488 1
orinoco 28484 0 [orinoco_cs]
hermes 3392 0 [orinoco_cs orinoco]
ds 6400 3 [serial_cs 3c589_cs orinoco_cs]
i82365 22672 3
pcmcia_core 45824 0 [serial_cs 3c589_cs orinoco_cs ds i82365]
lockd 42420 0 (autoclean) (unused)
sunrpc 57816 0 (autoclean) [lockd]
nls_cp437 3896 2 (autoclean)
trident 17812 2
ac97_codec 7372 0 [trident]
sound 56384 0 (unused)
soundlow 384 0 [sound]
soundcore 2452 8 [trident sound]
eepro100 14888 0
vfat 9428 1
smbfs 24892 0 (unused)
unix 11352 124 (autoclean)
==========
#/var/log# lspci -vv
00:00.0 Host bridge: Acer Laboratories Inc. [ALi]: Unknown device 1644 (rev
01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable)
Capabilities: [b0] AGP version 2.0
Status: RQ=27 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [a4] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5247 (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: f7f00000-fdffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
(prog-if 10 [OHCI])
Subsystem: Toshiba America Info Systems: Unknown device 0004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7eff000 (32-bit, non-prefetchable)
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c3)
(prog-if f0)
Subsystem: Toshiba America Info Systems: Unknown device 0004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at eff0
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 Multimedia audio controller: Acer Laboratories Inc. [ALi] M5451 PCI
South Bridge Audio (rev 01)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR+
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ed00
Region 1: Memory at f7efe000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV]
Subsystem: Toshiba America Info Systems: Unknown device 0004
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00:0a.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 0d)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7efd000 (32-bit, non-prefetchable)
Region 1: I/O ports at eb40
Region 2: Memory at f7ec0000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=2 PME-
00:10.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller
(rev 01)
Subsystem: Lucent Technologies: Unknown device ab01
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at <ignored> (32-bit, non-prefetchable)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt- PostWrite+
16-bit legacy interface ports at 0001
00:11.0 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus
Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at <ignored> (32-bit, non-prefetchable)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:11.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus
Bridge with ZV Support (rev 32)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin B routed to IRQ 11
Region 0: Memory at <ignored> (32-bit, non-prefetchable)
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:12.0 System peripheral: Toshiba America Info Systems: Unknown device 0805
(rev 03)
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7ebfe00 (32-bit, non-prefetchable)
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Trident Microsystems: Unknown device 8820
(rev 82) (prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 8
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, non-prefetchable)
Region 1: Memory at fbc00000 (32-bit, non-prefetchable)
Region 2: Memory at f8000000 (32-bit, non-prefetchable)
Region 3: Memory at f7ff8000 (32-bit, non-prefetchable)
Capabilities: [80] AGP version 2.0
Status: RQ=32 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
==========
#dmesg
Linux version 2.2.20 (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Apr 20
11:45:28 EST 2002BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 1ee60000 @ 00100000 (usable)
Detected 1195124 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2385.51 BogoMIPS
Memory: 499560k/507264k available (1756k kernel code, 412k reserved, 5384k
data, 152k init)
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
512K L2 cache (8 way)
CPU: L2 Cache: 512K
CPU: Intel 00/0b stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf97ab
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Starting kswapd v 1.5
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
ALI15X3: IDE controller on PCI bus 00 dev 20
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xeff0-0xeff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xeff8-0xefff, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK4018GAP, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-R2102, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: TOSHIBA MK4018GAP, 38154MB w/0kB Cache, CHS=4864/255/63
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3ware Storage Controller device driver for Linux v1.02.00.008.
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 hda3
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 996020k swap-space (priority -1)
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin
<saw@saw.sw.com.sg> and others
eepro100.c: VA Linux custom, Dragan Stancevic <visitor@valinux.com> 2000/11/15
eth0: OEM i82557/i82558 10/100 Ethernet, 00:00:39:3A:F1:DD, IRQ 11.
Board assembly 000000-000, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xb874c1d3).
Trident 4DWave/SiS 7018/Ali 5451 PCI Audio, version 0.14.6a, 11:53:38 Apr 20
2002
trident: ALi Audio Accelerator found at IO 0xed00, IRQ 11
ac97_codec: AC97 Audio codec, vendor id1: 0x414b, id2: 0x4d02 (Unknown)
ac97_codec: AC97 Modem codec, vendor id1: 0x5349, id2: 0x4c27 (Unknown)
Linux PCMCIA Card Services 3.1.33
kernel build: 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002
options: [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xf01d0
00:11.0 -> irq 11
00:11.1 -> irq 11
00:10.0 -> irq 11
Intel ISA/PCI/CardBus PCIC probe:
TI 1410 rev 01 PCI-to-CardBus at slot 00:10, mem 0x68000000
host opts [0]: [pci only] [pci irq 11] [lat 64/176] [bus 2/2]
PCI card interrupts, PCI status changes
Toshiba ToPIC100 rev 32 PCI-to-CardBus at slot 00:11, mem 0x68001000
host opts [0]: [slot 0xd0] [ccr 0x11] [cdr 0x86] [rcr 0xc000000] [pci irq
11] [lat 64/176] [bus 3/3]
host opts [1]: [slot 0xd0] [ccr 0x21] [cdr 0x86] [rcr 0xc000000] [pci irq
11] [lat 64/176] [bus 4/4]
PCI irq 11 test failed
ISA irqs (default) = 3,4,5,7,9,10,12 polling interval = 1000 ms
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hermes.c: 16 Jan 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco.c 0.09b (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs.c 0.09b (David Gibson <hermes@gibson.dropbear.id.au> and others)
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x408-0x40f
0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0380-0x0407: clean.
cs: IO port probe 0x0410-0x047f: clean.
cs: IO port probe 0x0490-0x04cf: clean.
cs: IO port probe 0x04d8-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
eth1: Station identity 001f:0001:0006:000e
eth1: Looks like a Lucent/Agere firmware version 6.14
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:43:05:89
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f
cs: memory probe 0x0d0000-0x0dffff: clean.
eth1: Null event in orinoco_interrupt!
eth1: Null event in orinoco_interrupt!
eth1: Null event in orinoco_interrupt!
eth1: Null event in orinoco_interrupt!
eth1: Null event in orinoco_interrupt!
eth2: 3Com 3c589, io 0x300, irq 3, hw_addr 00:00:86:1A:92:12
8K FIFO split 5:3 Rx:Tx, auto xcvr
tty01 at 0x02f8 (irq = 3) is a 16550A
eth0: 0 multicast blocks dropped.
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: