Re: SCSI Transfer rate
In my case it was the wrong adapter between my disk and cable. (It
was an 80<=>68-pin converter thingy.) Replacing it with the right one
solved the problem.
HTH,
--Pete
On Sun, Apr 21, 2002 at 05:54:05PM -0400, Robert Webb wrote:
> Hi all,
>
> I have a Symbios SCSI controller built onto my MB. The bios and debian
> on boot up report 40 MegaBit transfer rate. But further down in the
> kern.log I noticed the following:
>
> sym53c876-0-<0,*>: FAST-5 WIDE SCSI 10.0 MB/s (200 ns, offset 15)
> SCSI device sda: hdwr sector= 512 bytes. Sectors= 8888924 [4340 MB] [4.3 GB]
> sym53c876-0-<1,*>: FAST-5 WIDE SCSI 10.0 MB/s (200 ns, offset 15)
> SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8888924 [4340 MB] [4.3 GB]
> sym53c876-0-<2,*>: FAST-5 WIDE SCSI 10.0 MB/s (200 ns, offset 15)
> SCSI device sdc: hdwr sector= 512 bytes. Sectors= 8380080 [4091 MB] [4.1 GB]
> sym53c876-0-<3,*>: FAST-5 WIDE SCSI 10.0 MB/s (200 ns, offset 15)
> SCSI device sdd: hdwr sector= 512 bytes. Sectors= 8380080 [4091 MB] [4.1 GB]
>
>
> which states that it is only 10 MB/s. Is there something I need to
> change to correct this or is this normal??
>
>
> Thanks,
> Robert Webb
>
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: