ATI AllInWonder & loading TV module
I'm having trouble getting the bttv module loaded for a new machine that
has an ATI AllInWonder card in it.
I copied over the .deb of a 2.4.17 kernel that works on a similar machine
with a WinTV card in it. The systems are wood.
Here's dmesg:
Linux version 2.4.17 (root@teddy) (gcc version 2.95.4 (Debian prerelease)) #1 Sat Jan 26 11:48:28 EST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=302 video=vesa:mtrr hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1533.404 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3060.53 BogoMIPS
Memory: 513132k/524224k available (1485k kernel code, 10704k reserved, 484k data, 268k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(tm) 4 processor stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb600, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.15)
Starting kswapd
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 32768k
vesafb: mode is 800x600x24, linelength=2400, pages=22
vesafb: protected mode interface info at c000:49dd
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
lp0: using parport0 (polling).
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, ATA DISK drive
hdc: Hewlett-Packard CD-Writer cd16r, ATAPI CD/DVD-ROM drive
hdd: ATAPI-CD ROM-DRIVE-56MAX, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63
hdd: ATAPI 56X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 11 for device 00:0f.0
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 00:07.3
eth0: RealTek RTL-8029 found at 0xe800, IRQ 11, 00:50:BA:52:6A:22.
Linux video capture interface: v1.00
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected AMD 761 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Unknown @ 0xd8000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
es1371: version v0.30 time 11:49:51 Jan 26 2002
Creative EMU10K1 PCI Audio Driver, version 0.16, 11:49:46 Jan 26 2002
PCI: Found IRQ 10 for device 00:0c.0
PCI: Sharing IRQ 10 with 01:05.0
emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xe000-0xe01f, IRQ 10
ac97_codec: AC97 Audio codec, id: 0x4352:0x5914 (Cirrus Logic CS4297A rev B)
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:07.2
PCI: Sharing IRQ 11 with 00:07.3
PCI: Sharing IRQ 11 with 00:0f.0
uhci.c: USB UHCI at I/O 0xd800, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:07.3
PCI: Sharing IRQ 11 with 00:07.2
PCI: Sharing IRQ 11 with 00:0f.0
uhci.c: USB UHCI at I/O 0xdc00, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
reiserfs: checking transaction log (device 03:02) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 268k freed
Adding Swap: 979956k swap-space (priority -1)
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is Advanced Micro Devices [AMD] AMD-760 [Irongate] System Controller
i2c-core.o: i2c core module
i2c-core.o: driver tv card mixer driver registered.
i2c-viapro.o version 2.6.2 (20011118)
i2c-viapro.o: Found Via VT82C686A/B device
i2c-core.o: adapter SMBus Via Pro adapter at 5000 registered as adapter 0.
i2c-viapro.o: Via Pro SMBus detected and initialized
lp0: compatibility mode
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HP Model: CD-Writer cd16r Rev: OKS1
Type: CD-ROM ANSI SCSI revision: 02
Might I need to pass some flags to the module for this card?
--
"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
-- Benjamin Franklin
Reply to: