RE: booting from PCI IDE card rather than SCSI
Just a shot in the dark here since you didn't mention which SCSI
controller you are using, BUT you "should" have a SCSI setup to
configure its BIOS somewhere. It is NOT the one you have been using in
the KT7's BIOS setup program, although some MBs have an integrated SCSI
and its SCSI setup can be accessed from there. Anyhoo, get into the
SCSI controller's BIOS setup program and look for a "boot" setting and
turn it off.
HTH,
-Don Spoon-
Reply to: