Re: eql = tun + eth0
On Tue, 15 Jan 2002 crispin@iinet.net.au wrote:
> Recently I gave eql a try to spread load across two links that I
> controlled both ends of. I had lots of problems and I believe eql has
> not been actively maintained in the kernel for a long time. The
> enslaving of links works for outbound, but not for inbound traffic. I
> was able to use the /proc/.../rp_filter set to 0 to allow the
> backtraffic through, but it was in no way 'balanced'. >
But my problem is how to split traffic to the Internet via two devices.
The first one, eth0 is a wireless device, the second one tunl0 is a
IP tunnel (which I have to set up yet) via a ppp0 device on another
machine (the ppp0 connects to an ISP).
The main idea is how to add more bandwidth to that eth0 using the modem,
but I don't want to have a lot of editing on the firewall/NAT scripts
(that are already on the machine which has the eth0).
Oki
Reply to: