FW: dselect and hda:irq timeout
Michael,
This should have gone to you
cc to list
Ian
> -----Original Message-----
> From: Chun Kit Edwin Lau [mailto:try_email_me@yahoo.ca]
> Sent: Friday, August 10, 2001 3:49 PM
> To: Ian Perry
> Subject: Re: dselect and hda:irq timeout
>
>
> Hi,
>
> Long time ago, I have the same problem, and I fixed it
> by disable the dma mode. Don't really know what's going on?
>
> Edwin Lau
>
> On Fri, Aug 10, 2001 at 02:29:48PM +1000, Ian Perry wrote:
> > > From: Michael Mueller [mailto:bhu5nji@yahoo.com]
> > > Sent: Friday, August 10, 2001 2:36 PM
> > >
> > > While dselect is installing, I get intermittent errors. The
> > > dselect process
> > > continues to completion and I seem to be able to use what has been
> > > installed.
> > >
> > > The error messages are as follows:
> > >
> > > hda: irq timeout: status = 0x0d { Busy }
> > > ide0: reset: success
> > >
> > > Any ideas on why these messages appear?
> > >
> > > I've been experimenting with loading 2.2.r3. THis is a brand
> > > new machine:
> > > Duron 700Mhz, 128Mb DRAM, 10Gb HDD, 50x CDROM, AMD
> approved Biostar
> > > Mainboard.
> > >
> > > TIA,
> > > Mike
> >
> > I had a similar message while loading from CD. I had
> configured the machine
> > with the HD as primary master, and the CD as primary slave.
> The fix was to
> > put the CD onto the secondary slave.
> >
> > Ian
> >
> >
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
>
> --
> Edwin ERTW Lau
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
Reply to: