Re: Modem problems after kernel upgrade (long, w/ Radeon VE sidenote)
On Mon, Jul 23, 2001 at 09:31:42PM -0500, Jeremy wrote:
> output of dmesg:
>
> Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Redundant entry in serial pci_table. Please send the output of
> lspci -vv, this message (4793,4104,4793,215)
> and the manufacturer and name of serial board or modem board
> to serial-pci-info@lists.sourceforge.net.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
you should perhaps do this
> ttyS04 at port 0xac00 (irq = 5) is a 16550A
>
> output of setserial /dev/ttyS2 uart 16550A port 0xac00 irq 5:
> Cannot set serial info: Address already in use
Edit /etc/init.d/setserial to not autodetect ttyS2 and ttyS3
and setup ttyS2 with the above parameters specified.
> output of setserial /dev/ttyS04 uart 16550A port 0xac00 irq 5:
> /dev/ttyS04: No such file or directory
Maybe it works after you "MAKEDEV /dev/ttyS4", but it would be
more interesting to get the pci_table problem solved.
> > > with anyone and if anyone has any suggestions.
Please sanitize your emails when participating in a thread on
a mailing list. There's no need to keep resending text that
has already been received before by everyone on the list.
Cheers,
Joost
Reply to: