on Fri, May 11, 2001 at 08:14:38PM -0700, Forrest Cameranesi (forrest@bungie.org) wrote:
> At 2:44 PM -0700 05/11/2001, Karsten M. Self wrote:
> >on Wed, May 09, 2001 at 06:29:50PM -0700, Forrest Cameranesi
>
>
>
> >I don't see a reference to your SCSI controller. This is going to make
> >a difference in configuring things, and may be the biggest single issue
> >here.
> >
> >For the rest of your hardware, I'd strongly recommend you do some
> >targeted Google searches or look at hardware lists. If your internet
> >access is so limited this is difficult, have someone do this for you or
> >hit a more accessible terminal someplace.
> >
> >> The system is assembled and the hard drives are partitioned. But,
> >> Debian can't see the drives and I don't have the Debian-compatible
> >> software drivers for any of the above hardware.
> >
> >SCSI card info is necessary here. Review your dmesg output and/or post
> >here if you can't interpret it.
>
> It says:
>
> SCSI0:0:2:0 Synchonus aat 40.0 Mbyte/sec, offset 15
> Vendor: IBM Model: DRV509V Rev. 0140
> Type: Direct access ANSI SCSI revision: 0
> Detected SCS disc SDC at SCSI O, Channel 0, I.D. 2, LUN 0
> (SCSI0:0:4:0) Synchronus 15 20.0 Mbyte/sec, pffset 16
> Vendor: Toshuiba Model: CD-ROM XM-640ITA Rev: 1009
> Type: CD-ROM ANSI SCSI Revision: 02
> Detected SCS CDROM SR0 at SCSI0, channel 0, ID4, LUN0
> SCSI: Detected 1 SCSI cdrom 3 SCSI discs total
> Uniform CD-Rom driver revision 3:11
> SCSI device sda:hdwr sector=512 bytes. secors=17916240[8748MB]8.7GB
> SCSI device sdb:hdwr sector=512 bytes. secors=17916240[8748MB]8.7GB
> SCSI device sdc:hdwr sector=512 bytes. secors=17928698[8754MB]8.7GB
> Partition check:
> sda: sda2 sda2 <sda5> sda 3
> sdb: sdb1 sdb2 <sdb5> sdb3
> sdc: sdc1 sdc2 <sdc5> sdc3
> UFS: mounted root (ext2filesystem) readonly
> freeomg unused kernel memory: 140K freed
> net4: UNIX domain sockets 1.0 for Linux Net 4.0
> Adding swa[" 1140604K swap-space (priority-1)
> Seruak driver version 4.27 with no serial options enabled
> TTYS00 at oxo3P8 (IRQ=4) is a 16550A
> TTYS01 at oxo2f8 (IRC=3) is a 16550A
>
> Note: The supermicro P6DGU [BX] motherboard has built-in SCSI using
> Adapted 7800 family manager, the manual shows when used with SCO UNIX
> that BLAD or BLAD325 set drivers are to be used.
OK.
Are you seeing the partitions or not? Look like you should have three
disks, with four partitions apiece.
Have you identified the driver (looks like you have) and installed it
and/or specified it during the install?
What's the output of:
$ fdisk -l /dev/sda
$ fdisk -l /dev/sdb
$ fdisk -l /dev/sdc
$ lsmod
$ cat /proc/devices
$ cat /proc/pci
$ cat /proc/scsi/scsi
Cheers.
--
Karsten M. Self <kmself@ix.netcom.com> http://kmself.home.netcom.com/
What part of "Gestalt" don't you understand? There is no K5 cabal
http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org
Attachment:
pgpC7eCGk7LDF.pgp
Description: PGP signature