problem w voodoo3/XF86-4
Hello List
I still have this problem with my voodoo 3 3500 and XFree86-4.0.2-13:
My X-server crashes every time I want to run a 3d-accelerated program (i.e.
quake3, ut, ...) The funny thing is, XScreensaver runs (well, it does not
actually run, but walk ;-)) - I see an error message when it starts, but it
disappears too fast that I could read it. However, if anybody has quake3 running
on xf4 and voodoo3, I would appreciate to know how it has to be set up (I
have tried to load all possible combinations of dri, tdfx, tdfx-dri, glx,...,
the kernel supports agpgart, tdfx, dtfx-fb,...) I really don't know where to
look for the problem.
I will attach my XF86Config and the Xserver-logfile, hoping that anyone can
help me
thanks
joerg
PS.: By the way, I was offered Quake III Team Arena for my birthday two days
ago, I'd really like to try it out...
-*- XF86Config -*-
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
Load "dri"
Load "tdfx"
Load "tdfx_dri"
Load "xf86Wacom"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/local/share/fonts/ttfonts/"
# The module search path. The default path is shown here.
ModulePath "/usr/X11R6/lib/modules"
EndSection
-*- End XF86Config -*-
-*- XFree86.0.log -*-
XFree86 Version 4.0.2 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 18 December 2000
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.18 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Apr 28 15:55:09 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "VisionMaster450"
(**) | |-->Device "Grafikkarte"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) |-->Input Device "Wacom Stylus"
(**) |-->Input Device "Wacom Cursor"
(**) |-->Input Device "Wacom Eraser"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/local/share/fonts/ttfonts/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules,/usr/X11R6/lib/modules-dri"
(++) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.3
XFree86 XInput driver : 0.1
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hdr
00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hdr
01
(II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr
80
(II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr
00
(II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr
00
(II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr
00
(II) PCI: 00:09:0: chip 11ad,0002 card 2646,f002 rev 20 class 02,00,00 hdr
00
(II) PCI: 00:0a:0: chip 9004,7178 card 0000,0000 rev 00 class 01,00,00 hdr
00
(II) PCI: 00:0b:0: chip 1274,1371 card 1274,1371 rev 08 class 04,01,00 hdr
00
(II) PCI: 01:00:0: chip 121a,0005 card 121a,0061 rev 01 class 03,00,00 hdr
00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xde000000 - 0xe1dfffff (0x3e00000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe1f00000 - 0xe3ffffff (0x2100000) MX[B]
(II) Bus -1: bridge is at (0:4:0), (0,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) 3Dfx Interactive Voodoo3 rev 1, Mem @ 0xde000000/25,
0xe2000000/25, I/O @ 0xd800/8
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) Active PCI resource ranges:
[0] -1 0xdd000000 - 0xdd000fff (0x1000) MX[B]
[1] -1 0xdd800000 - 0xdd8000ff (0x100) MX[B]
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[3] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[4] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[5] -1 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[6] -1 0x0000a400 - 0x0000a43f (0x40) IX[B]
[7] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[8] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[9] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[10] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xdd000000 - 0xdd000fff (0x1000) MX[B]
[1] -1 0xdd800000 - 0xdd8000ff (0x100) MX[B]
[2] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[3] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[4] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[5] -1 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[6] -1 0x0000a400 - 0x0000a43f (0x40) IX[B]
[7] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[8] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[9] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[10] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdd000000 - 0xdd000fff (0x1000) MX[B]
[6] -1 0xdd800000 - 0xdd8000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[10] -1 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[11] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[12] -1 0x0000a400 - 0x0000a43f (0x40) IX[B]
[13] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[14] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[15] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[17] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.1.8
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "tdfx"
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "tdfx_dri"
(WW) Warning, couldn't open module tdfx_dri
(II) UnloadModule: "tdfx_dri"
(EE) Failed to load module "tdfx_dri" (module does not exist, 0)
(II) LoadModule: "xf86Wacom"
(II) Loading /usr/X11R6/lib/modules/xf86Wacom.so
(EE) LoadModule: Module xf86Wacom does not have a xf86WacomModuleData data
object.
(II) UnloadModule: "xf86Wacom"
(II) Unloading /usr/X11R6/lib/modules/xf86Wacom.so
(EE) Failed to load module "xf86Wacom" (invalid module, 0)
(II) LoadModule: "tdfx"
(II) Reloading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) UnloadModule: "tdfx"
(EE) Failed to load module "tdfx" (once-only module, 256)
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) LoadModule: "wacom"
(II) Loading /usr/X11R6/lib/modules/input/wacom_drv.o
(II) Module wacom: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset 3dfx Voodoo3 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdd000000 - 0xdd000fff (0x1000) MX[B]
[6] -1 0xdd800000 - 0xdd8000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[10] -1 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[11] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[12] -1 0x0000a400 - 0x0000a43f (0x40) IX[B]
[13] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[14] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[15] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[16] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[17] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xdd000000 - 0xdd000fff (0x1000) MX[B]
[6] -1 0xdd800000 - 0xdd8000ff (0x100) MX[B]
[7] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[8] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[9] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[10] -1 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[15] -1 0x0000a400 - 0x0000a43f (0x40) IX[B]
[16] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[17] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[18] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[19] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[20] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[21] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) TDFX(0): Softbooting the board (through the int10 interface).
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): Softbooting the board succeeded.
(**) TDFX(0): Depth 16, (--) framebuffer bpp 16
(==) TDFX(0): RGB weight 565
(==) TDFX(0): Default visual is TrueColor
(--) TDFX(0): Chipset: "3dfx Voodoo3"
(--) TDFX(0): Linear framebuffer at 0xE2000000
(--) TDFX(0): MMIO registers at addr 0xDE000000
(--) TDFX(0): PIO registers at addr 0xD800
(**) TDFX(0): VideoRAM: 16384 kByte Mapping 32768 kByte
(==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0)
(II) TDFX(0): VisionMaster450: Using hsync range of 31.50-82.00 kHz
(II) TDFX(0): VisionMaster450: Using vrefresh range of 50.00-100.00 Hz
(II) TDFX(0): Clock range: 12.00 to 300.00 MHz
(WW) TDFX(0): Default mode "1024x768" deleted (bad mode
clock/interlace/doublescan)
(WW) TDFX(0): Default mode "1280x960" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1792x1344" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1792x1344" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1856x1392" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1856x1392" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1920x1440" deleted (hsync out of range)
(WW) TDFX(0): Default mode "1920x1440" deleted (hsync out of range)
(--) TDFX(0): Virtual size is 1152x864 (pitch 1152)
(**) TDFX(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) TDFX(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) TDFX(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) TDFX(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(==) TDFX(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) TDFX(0): initializing int10
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): VESA BIOS detected
(II) TDFX(0): VESA VBE Version 3.0
(II) TDFX(0): VESA VBE Total Mem: 16384 kB
(II) TDFX(0): VESA VBE OEM: 3dfx Interactive, Inc.
(II) TDFX(0): VESA VBE OEM Software Rev: 2.1
(II) TDFX(0): VESA VBE OEM Vendor: 3dfx Interactive, Inc.
(II) TDFX(0): VESA VBE OEM Product: Voodoo3 3500 TV
(II) TDFX(0): VESA VBE OEM Product Rev: 210-0371-00X
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) TDFX(0): VESA VBE DDC supported
(II) TDFX(0): VESA VBE DDC Level 2
(II) TDFX(0): VESA VBE DDC transfer in appr. 8 sec.
(II) TDFX(0): VESA VBE DDC read successfully
(II) TDFX(0): Manufacturer: IVM Model: 1900 Serial#: 0
(II) TDFX(0): Year: 1997 Week: 51
(II) TDFX(0): EDID Version: 1.1
(II) TDFX(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) TDFX(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync
Pulse req. if CompSync or SyncOnGreen
(II) TDFX(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) TDFX(0): Gamma: 2.39
(II) TDFX(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) TDFX(0): redX: 0.625 redY: 0.340 greenX: 0.284 greenY: 0.600
(II) TDFX(0): blueX: 0.149 blueY: 0.064 whiteX: 0.282 whiteY: 0.297
(II) TDFX(0): Supported VESA Video Modes:
(II) TDFX(0): 640x480@60Hz
(II) TDFX(0): 640x480@67Hz
(II) TDFX(0): 640x480@72Hz
(II) TDFX(0): 640x480@75Hz
(II) TDFX(0): 800x600@56Hz
(II) TDFX(0): 800x600@60Hz
(II) TDFX(0): 800x600@72Hz
(II) TDFX(0): 800x600@75Hz
(II) TDFX(0): 832x624@75Hz
(II) TDFX(0): 1024x768@87Hz (interlaced)
(II) TDFX(0): 1024x768@60Hz
(II) TDFX(0): 1024x768@70Hz
(II) TDFX(0): 1024x768@75Hz
(II) TDFX(0): 1280x1024@75Hz
(II) TDFX(0): 1152x870@75Hz
(II) TDFX(0): Manufacturer's mask: 7C
(II) TDFX(0): Supported Future Video Modes:
(II) TDFX(0): #0: hsize: 1600 vsize 1200 refresh: 80 vid: 21673
(II) TDFX(0): Supported additional Video Mode:
(II) TDFX(0): clock: 260.0 MHz Image Size: 54 x 3688 mm
(II) TDFX(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160
h_border: 17
(II) TDFX(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250
v_border: 0
(II) TDFX(0):
(II) TDFX(0):
(II) TDFX(0):
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B]
[1] 0 0xde000000 - 0xdfffffff (0x2000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xdd000000 - 0xdd000fff (0x1000) MX[B]
[8] -1 0xdd800000 - 0xdd8000ff (0x100) MX[B]
[9] -1 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
[10] -1 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B)
[11] -1 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B)
[12] -1 0xde000000 - 0xdfffffff (0x2000000) MX[B](B)
[13] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[14] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[15] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[16] 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[17] -1 0x00000000 - 0x000001ff (0x200) IX[B]E
[18] -1 0x0000a400 - 0x0000a43f (0x40) IX[B]
[19] -1 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[20] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[21] -1 0x0000b400 - 0x0000b41f (0x20) IX[B]
[22] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[23] -1 0x0000b800 - 0x0000b80f (0x10) IX[B]
[24] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) TDFX(0): Write-combining range (0xe2000000,0x2000000)
(II) TDFX(0): Textures Memory 9.76 MB
(0): [drm] created "tdfx" driver at busid "PCI:1:0:0"
(0): [drm] added 4096 byte SAREA at 0xc36fe000
(0): [drm] mapped SAREA 0xc36fe000 to 0x40017000
(0): [drm] framebuffer handle = 0xe2000000
(0): [drm] added 1 reserved context for kernel
(II) TDFX(0): [drm] Registers = 0xde000000
(II) TDFX(0): visual configs initialized
(II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Driver provided NonTEGlyphRenderer replacement
Setting up tile and stipple cache:
9 128x128 slots
(==) TDFX(0): Backing store disabled
(==) TDFX(0): Silken mouse enabled
(0): X context handle = 0x00000001
(0): [drm] installed DRM signal handler
(0): [DRI] installation complete
(II) TDFX(0): direct rendering enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Buttons" "5"
(**) Mouse1: Buttons: 5
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "AlwaysCore" "On"
(**) Wacom Stylus: always reports core events
(**) Option "CorePointer"
(**) Wacom Stylus: Core Pointer
(**) Wacom Stylus serial device is /dev/ttyS0
(**) Wacom Stylus is in absolute mode
(**) Option "KeepShape" "On"
(**) Wacom Stylus: keeps shape
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "1280"
(**) Wacom Stylus: bottom x = 1280
(**) Option "BottomY" "1024"
(**) Wacom Stylus: bottom x = 1024
(**) Wacom Stylus: serial number = 0
(**) Option "BaudRate" "9600"
(**) Wacom Stylus: serial speed 9600
(EE) Attempt to register more than one core pointer (Wacom Stylus)
(**) Option "AlwaysCore" "On"
(**) Wacom Cursor: always reports core events
(**) Option "CorePointer"
(**) Wacom Cursor: Core Pointer
(**) Wacom Cursor serial device is /dev/ttyS0
(**) Wacom Cursor is in absolute mode
(**) Option "KeepShape" "On"
(**) Wacom Cursor: keeps shape
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "1280"
(**) Wacom Cursor: bottom x = 1280
(**) Option "BottomY" "1024"
(**) Wacom Cursor: bottom x = 1024
(**) Wacom Cursor: serial number = 0
(**) Option "BaudRate" "9600"
(**) Wacom Cursor: serial speed 9600
(EE) Attempt to register more than one core pointer (Wacom Cursor)
(**) Option "AlwaysCore" "On"
(**) Wacom Eraser: always reports core events
(**) Option "CorePointer"
(**) Wacom Eraser: Core Pointer
(**) Wacom Eraser serial device is /dev/ttyS0
(**) Wacom Eraser is in absolute mode
(**) Option "KeepShape" "On"
(**) Wacom Eraser: keeps shape
(**) Option "TopX" "0"
(**) Option "TopY" "0"
(**) Option "BottomX" "1280"
(**) Wacom Eraser: bottom x = 1280
(**) Option "BottomY" "1024"
(**) Wacom Eraser: bottom x = 1024
(**) Wacom Eraser: serial number = 0
(**) Option "BaudRate" "9600"
(**) Wacom Eraser: serial speed 9600
(EE) Attempt to register more than one core pointer (Wacom Eraser)
(II) XINPUT: Adding extended input device "Wacom Eraser" (type: Wacom
Eraser)
(II) XINPUT: Adding extended input device "Wacom Cursor" (type: Wacom
Cursor)
(II) XINPUT: Adding extended input device "Wacom Stylus" (type: Wacom
Stylus)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(**) Option "Device" "/dev/ttyS0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(==) Wacom tablet model : KT-0405-R00 V1.3-3
(==) Wacom IV tablet maximum X=6400 maximum Y=4800 X resolution=1270 Y
resolution=1270 suppress=5
(==) Wacom tablet top X=0 top Y=0 bottom X=6400 bottom Y=4800
(==) Wacom tablet top X=0 top Y=0 bottom X=6400 bottom Y=4800
(==) Wacom tablet top X=0 top Y=0 bottom X=6400 bottom Y=4800
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing
from list!
SetKbdSettings - type: 2 rate: 30 delay: 500 snumlk: 0
SetKbdSettings - Succeeded
GetModeLine - scrn: 0 clock: 108000
GetModeLine - hdsp: 1152 hbeg: 1216 hend: 1344 httl: 1600
vdsp: 864 vbeg: 865 vend: 868 vttl: 900 flags: 5
--
GMX - Die Kommunikationsplattform im Internet.
http://www.gmx.net
Reply to: