Re: XFree86 agpgart.o
hi thx for the response...
i solved the problem in another way...
i got me the binaries for xfree86 4.0.2 and installed them over the old
stuff...
finally it worked :-)
kde is up and running...
greets peter
Am Freitag, 16. Februar 2001 23:39 schrieben Sie:
> I used the i810gtt-0.2-4.src.rpm and xfcom_i810-1.2-3.i386.rpm files
>
> >from http://www.intel.com. Then I rpm -U i810gtt and alien xfcom_i810.
>
> Going to /usr/src/redhat/SOURCE I rebuild agpgart.o for my running
> kernel, insmod it, and then dpkg -i xfcom's deb I just "alienated". I
> maked sure /etc/X11/X pointed to /usr/X11/bin/XFCom_i810 and ran
> xf86config to reconfigure my /etc/X11/XF86Config-4. I reviewed the file,
> and startx worked at last!
>
> I don't know if this could work for you, but here it did. I can send you
> the files if you like to.
>
> peter wrote:
> > hi there !!
> >
> > im recently trying to run an xserver on a "fuckin" (sorry) i810 intel
> > board... all those on-board stuff sucks... but anyways...
> >
> > im running potato with a new 2.4.1 kernel ( i also got the new modutils
> > and stuff and all works fine )...
> > on the xfree site they say to run the server with the i810 chipset i
> > would need a "agpgart.o" - module that comes with the server !?!
> > i cant find it anywhere... i got one compiled with the kernel and
> > modprobe loads it, but still the server wont start...
> >
> > heres what it said =>
> >
> > XF86Config: /usr/X11R6/lib/X11/XF86Config
> > (**) stands for supplied, (--) stands for probed/default values
> > (**) XKB: keymap: "xfree86(de)" (overrides other XKB settings)
> > (**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
> > (**) Mouse: 3 button emulation (timeout: 50ms)
> > (**) SVGA: Graphics device ID: "i810"
> > (**) SVGA: Monitor ID: "My Monitor"
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> > (--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> > (--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> > (--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> > (--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> > (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> > (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> > (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> > (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> > (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> > (**) FontPath set to
> > "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/
> >:unscaled,/usr/X11R6/lib/X11/fonts
> > /misc/,/usr/X11R6/lib/X11/fonts/100dpi/"
> > (--) SVGA: PCI: Intel Unknown chipset (0x7121) rev 3, Memory @
> > 0xd8000000, 0xdc100000
> > (--) SVGA: error doing ioctl(GARTIOCINFO): Invalid argument
> >
> > Fatal server error:
> > Aborting
> >
> > When reporting a problem related to a server crash, please send
> > the full server output, not just the last messages
> >
> > XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
> > after 0 requests (0 known processed) with 0 events remaining.
> >
> > anyone got an idea ??
> >
> > thx a lot...
> >
> > peter
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
Reply to: