[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

pppd dies when dialing with wvdial & modem sound?



Hi,all,
	I dials out with wvdial,but every time after connection pppd dies.Detail maybe
too many info for checking is below.
	Another question is that lynx can not recognize urls though I have put my ISP's
DNS server like this:
	nameserver 202.96.209.5
	nameserver 202.96.209.133
in /etc/resolv.conf.But when I dialed with pon,it can.
	Last is about my modem and cmpci sound card drivers.Although I enable the option
modem whem I do load module of cmpci driver.But I never heard sounds from my modem through
cmpci sound card.I know my modem is a winmodem.Is there anyone who experienced a different 
situation,pls tell me.Thanks a lot.

########### Information from wvdial ##################
.....
Password: 
--> Looks like a password prompt.
--> Sending: (password)
~Entering PPP mode.}-}*Async interface address is unnumbered (FastEthernet0/1/0)}-}*MTU is 1500 bytes}-}*}-}*}]`~
--> Looks like a welcome message.
--> Starting pppd at Sun Dec 17 10:44:12 2000
--> PPP daemon has died! (exit code = 8)
--> Disconnecting at Sun Dec 17 10:44:37 2000
--> Auto Reconnect will be attempted in 5 seconds
--> pppd error!  Look at files in /var/log for an explanation.
-.....
############ Information from syslog ##################
....
Dec 17 10:39:47 cosyhut kernel: cm: found CM8738 adapter at io 0xc400 irq 11
Dec 17 10:39:47 cosyhut kernel: cm: modem function supported
Dec 17 10:39:47 cosyhut kernel: CSLIP: code copyright 1989 Regents of the University of California
Dec 17 10:39:47 cosyhut kernel: PPP: version 2.3.7 (demand dialling)
Dec 17 10:39:47 cosyhut kernel: PPP line discipline registered.
Dec 17 10:39:47 cosyhut kernel: pctel.o init
Dec 17 10:39:47 cosyhut kernel: PCtel device (29) found:  irq = 3, base = 0xc800
Dec 17 10:39:47 cosyhut kernel: Serial driver version 4.27.100 with no serial options enabled
Dec 17 10:39:47 cosyhut kernel: ttyS15 at 0xc800 (irq = 3) is a PCtel
Dec 17 10:39:47 cosyhut /usr/sbin/cron[146]: (CRON) INFO (pidfile fd = 3)
Dec 17 10:39:47 cosyhut /usr/sbin/cron[147]: (CRON) STARTUP (fork ok)
Dec 17 10:41:17 cosyhut kernel: assign pctel_interrupt
Dec 17 10:42:09 cosyhut last message repeated 2 times
Dec 17 10:43:27 cosyhut kernel: assign pctel_interrupt
Dec 17 10:44:12 cosyhut kernel: registered device ppp0
Dec 17 10:44:12 cosyhut pppd[182]: pppd 2.3.11 started by root, uid 0
Dec 17 10:44:12 cosyhut chat[184]: abort on (BUSY)
Dec 17 10:44:12 cosyhut chat[184]: abort on (NO CARRIER)
Dec 17 10:44:12 cosyhut chat[184]: abort on (VOICE)
Dec 17 10:44:12 cosyhut chat[184]: abort on (NO DIALTONE)
Dec 17 10:44:12 cosyhut chat[184]: abort on (NO DIAL TONE)
Dec 17 10:44:12 cosyhut chat[184]: abort on (NO ANSWER)
Dec 17 10:44:12 cosyhut chat[184]: send (ATZ^M)
Dec 17 10:44:12 cosyhut chat[184]: expect (OK)
Dec 17 10:44:16 cosyhut chat[184]: ~^?}#@!}!2} }4}"}&} }*} } }%}&I.5}5}'}"}(}" .~~^?}#@!}!3} }4}"}&} }*} } }%}&I.5}5}
Dec 17 10:44:20 cosyhut chat[184]: '}"}(}"i=~~^?}#@!}!4} }4}"}&} }*} } }%}&I.5}5}'}"}(}"%]~~^?}#@!}!5} }4}"}&} }*} } 
Dec 17 10:44:24 cosyhut chat[184]: }%}&I.5}5}'}"}(}"lN~~^?}#@!}!6} }4}"}&} }*} } }%}&I.5}5}'}"}(}"&s~~^?}#@!}!7} }4}"
Dec 17 10:44:28 cosyhut chat[184]: }&} }*} } }%}&I.5}5}'}"}(}"o`~~^?}#@!}!8} }4}"}&} }*} } }%}&I.5}5}'}"}(}"/:~~^?}#@
Dec 17 10:44:30 cosyhut chat[184]: !}!9} }4}"}&} }*} } }%}&I.5}5}'}"}(}"f)~~^?}#@!}!:} }4}"}&} }*} } }%}&I.5}5}'}"}(
Dec 17 10:44:34 cosyhut chat[184]: }",^T~~^?}#@!}!;} }4}"}&} }*} } }%}&I.5}5}'}"}(}"e}'~~^?}#@!}!<} }4}"}&} }*} } }%}&
Dec 17 10:44:37 cosyhut chat[184]: I.5}5}'}"}(}")g~^M
Dec 17 10:44:37 cosyhut chat[184]: NO CARRIER
Dec 17 10:44:37 cosyhut chat[184]:  -- failed
Dec 17 10:44:37 cosyhut chat[184]: Failed (NO CARRIER)
Dec 17 10:44:37 cosyhut pppd[182]: Connect script failed
Dec 17 10:44:37 cosyhut pppd[182]: Exit.
Dec 17 10:44:37 cosyhut kernel: assign pctel_interrupt
Dec 17 10:44:42 cosyhut kernel: assign pctel_interrupt
Dec 17 10:45:21 cosyhut pppd[187]: pppd 2.3.11 started by root, uid 0
Dec 17 10:45:21 cosyhut chat[188]: abort on (BUSY)
Dec 17 10:45:21 cosyhut chat[188]: abort on (NO CARRIER)
Dec 17 10:45:21 cosyhut chat[188]: abort on (VOICE)
Dec 17 10:45:21 cosyhut chat[188]: abort on (NO DIALTONE)
Dec 17 10:45:21 cosyhut chat[188]: abort on (NO DIAL TONE)
Dec 17 10:45:21 cosyhut chat[188]: abort on (NO ANSWER)
Dec 17 10:45:21 cosyhut chat[188]: send (ATZ^M)
Dec 17 10:45:21 cosyhut chat[188]: expect (OK)
Dec 17 10:45:25 cosyhut chat[188]: ~^?}#@!}!}>} }4}"}&} }*} } }%}&eq*H}'}"}(}"#'~~^?}#@!}!}?} }4}"}&} }*} } }%}&eq*H}
Dec 17 10:45:29 cosyhut chat[188]: '}"}(}"j4~~^?}#@!}! } }4}"}&} }*} } }%}&eq*H}'}"}(}"1j~~^?}#@!}!!} }4}"}&} }*} } }
Dec 17 10:45:33 cosyhut chat[188]: %}&eq*H}'}"}(}"xy~~^?}#@!}!"} }4}"}&} }*} } }%}&eq*H}'}"}(}"2D~~^?}#@!}!#} }4}"}&}
Dec 17 10:45:34 cosyhut pppd[187]: Terminating on signal 15.
Dec 17 10:45:34 cosyhut chat[188]: SIGTERM
Dec 17 10:45:34 cosyhut pppd[187]: Connect script failed
Dec 17 10:45:34 cosyhut pppd[187]: Exit.
......
       
Thanks for u spent ur precious time reading so much...
    
yours,

 doodler
 debian_en@citiz.net



Reply to: