Re: HT configure an IDE/ATAPI ZIP drive?
>>>>> "Criggie" == C Falconer <criggie@ihug.co.nz> writes:
Criggie> Under Block Devices < > Include IDE/ATAPI FLOPPY support
Criggie> (I called it by the wrong name sorry) Heres the help for
Criggie> it:
Criggie> x CONFIG_BLK_DEV_IDEFLOPPY:
snip
Criggie> Then reboot, and your ZIP drive should be identified as
Criggie> /dev/hdc or hdd or similar.
snip
Criggie> Try the above and it should work.
Alas, it did not.
I can still mount and access the drive. But I cannot eject, either by
software or hardware.
I've also tried the eject command. No luck.
Thanks,
Dan
--
----------------------
Dan Griswold
dgriswol@mail.smu.edu
----------------------
Reply to: