Re: HD Error...

[Jiri Klouda <jk@atrey.karlin.mff.cuni.cz>]

> search the archives for "DriveReady SeekComplete". this has been
>  discussed to some extent before ;-)
>
> &rw
>
> >Dec  5 13:54:39 zaya kernel: hdc: read_intr: status=0x59 { DriveReady SeekComp
> >lete DataRequest Error }
> >Dec  5 13:54:39 zaya kernel: hdc: read_intr: error=0x40 { UncorrectableError }
> >, LBAsect=26564179, sector=6553363
> >Dec  5 13:54:39 zaya kernel: end_request: I/O error, dev 16:03 (hdc), sector 6
> >553363
> >


Unfortunately my problem is slightly different. The messages are different
and this situation in particular was not discussed though some person earlier
had problems with similar HD (also IBM 30Gb, but a bit different) mine is
HD IBM-DTLA-307030. Well... I would really like to know where is problem here.
I tried to change DMA, but it says that the function is not avaiable and DMA
is off by default (it seems right since even W2k complain about no DMA on this
disk). And I tried all 0-3 in hdparm -c, but no help.

Here are some more details about my disks:

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
hda: QUANTUM FIREBALL EX12.7A, ATA DISK drive
hdc: IBM-DTLA-307030, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 24901632 sectors (12750 MB) w/418KiB Cache, CHS=1550/255/63
hdc: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63

Jirka