RE: startx problem
But what about the end of the output ?
...
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm
-m fr -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml
"Errors from xkbcomp are not fatal to the X server" keymap/xfree86
/var/tmp/xfree86.xkm'
...
what does this mean ?
> -----Message d'origine-----
> De: Erik Steffl [mailto:steffl@bigfoot.com]
> Date: mercredi 22 novembre 2000 12:16
> À: Debian User List (Adresse de messagerie)
> Objet: Re: startx problem
>
>
> is there any problem? the stuff below looks like normal X run.
>
> the X is probably on vt7
>
> generally, when you wantto launch X you run startx (from
> command line)
> or xdm (usually from inittab).
>
> erik
>
> Pascal THIVENT wrote:
> >
> > Hi,
> >
> > when i launch X, i get this message :
> >
> > XFree86 Version 3.3.6 / X Window System
> > (protocol Version 11, revision 0, vendor release 6300)
> > Release Date: January 8 2000
> > If the server is older than 6-12 months, or if your card is newer
> > than the above date, look for a newer version before reporting
> > problems. (see http://www.XFree86.Org/FAQ)
> > Operating System: Linux 2.2.17pre10 i686 [ELF]
> > Configured drivers:
> > S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
> > s3_ViRGE
> > (using VT number 7)
> >
> > XF86Config: /usr/X11R6/lib/X11/XF86Config
> > (**) stands for supplied, (--) stands for probed/default values
> > (**) XKB: keymap: "xfree86(fr)" (overrides other XKB settings)
> > (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
> > (**) Mouse: buttons: 3
> > (**) S3V: Graphics device ID: "DSV3325DX"
> > (**) S3V: Monitor ID: "CM0800"
> > (--) S3V: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
> > (--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> > (--) S3V: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> > (--) S3V: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> > (--) S3V: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> > (--) S3V: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> > (**) FontPath set to
> >
> "/usr/lib/X11/fonts/misc/:unscaled,/usr/lib/X11/fonts/75dpi/:u
> nscaled,/usr/l
> >
> ib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/Type1/,/usr/l
> ib/X11/fonts/S
> >
> peedo/,/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/75dpi/,/usr
> /lib/X11/fonts
> > /100dpi/"
> > (--) S3V: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xf0000000
> > (--) S3V: chipset: ViRGE/DX rev. 1
> > (**) S3V: chipset driver: s3_VIRGE
> > (**) S3V: videoram: 4096k
> > (**) S3V: Ramdac type: s3_trio64
> > (**) S3V: Ramdac speed: 170 MHz
> > (--) S3V: Using Trio32/64 programmable clock (MCLK 69.801 MHz)
> > (--) S3V: Maximum allowed dot-clock: 170.000 MHz
> > (**) S3V: Mode "1024x768": mode clock = 75.000
> > (**) S3V: Mode "800x600": mode clock = 60.750
> > (**) S3V: Mode "640x480": mode clock = 30.000
> > (**) S3V: Using 16 bpp. Color weight: 565
> > (--) S3V: Virtual resolution set to 1024x768
> > (--) S3V: Local bus LAW is 0xF00xxxxx
> > (--) S3V: Using a banksize of 4096k, line width of 1024
> > System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1
> -R/usr/X11R6/lib/X11/xkb -xkm
> > -m fr -em1 "The XKEYBOARD keymap compiler (xkbcomp)
> reports:" -emp "> " -eml
> > "Errors from xkbcomp are not fatal to the X server" keymap/xfree86
> > /var/tmp/xfree86.xkm'
> >
> > Any idea ?
> >
> > Pascal Thivent
> >
> > --
> > Unsubscribe? mail -s unsubscribe
> debian-user-request@lists.debian.org < /dev/null
>
>
> --
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
>
Reply to: