[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: startx problem



i had a similar problem (back when i had X installed) - to get to the
windows environment, just press alt+F7 to get to the virtual terminal (it
may be ctrl+alt+F7, i'm telnetting on a windows machine right now and
can't check - sorry).

happy holidays!

On Wed, 22 Nov 2000, Erik Steffl wrote:

>   is there any problem? the stuff below looks like normal X run.
> 
>   the X is probably on vt7
> 
>   generally, when you wantto launch X you run startx (from command line)
> or xdm (usually from inittab).
> 
> 	erik
> 
> Pascal THIVENT wrote:
> > 
> > Hi,
> > 
> > when i launch X, i get this message :
> > 
> > XFree86 Version 3.3.6 / X Window System
> > (protocol Version 11, revision 0, vendor release 6300)
> > Release Date: January 8 2000
> >  If the server is older than 6-12 months, or if your card is newer
> >  than the above date, look for a newer version before reporting
> >  problems.  (see http://www.XFree86.Org/FAQ)
> > Operating System: Linux 2.2.17pre10 i686 [ELF]
> > Configured drivers:
> >   S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
> >       s3_ViRGE
> > (using VT number 7)
> > 
> > XF86Config: /usr/X11R6/lib/X11/XF86Config
> > (**) stands for supplied, (--) stands for probed/default values
> > (**) XKB: keymap: "xfree86(fr)" (overrides other XKB settings)
> > (**) Mouse: type: Microsoft, device: /dev/mouse, baudrate: 1200
> > (**) Mouse: buttons: 3
> > (**) S3V: Graphics device ID: "DSV3325DX"
> > (**) S3V: Monitor ID: "CM0800"
> > (--) S3V: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
> > (--) S3V: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
> > (--) S3V: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
> > (--) S3V: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
> > (--) S3V: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
> > (--) S3V: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
> > (--) S3V: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
> > (--) S3V: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
> > (--) S3V: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
> > (**) FontPath set to
> > "/usr/lib/X11/fonts/misc/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/l
> > ib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/S
> > peedo/,/usr/lib/X11/fonts/misc/,/usr/lib/X11/fonts/75dpi/,/usr/lib/X11/fonts
> > /100dpi/"
> > (--) S3V: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xf0000000
> > (--) S3V: chipset:   ViRGE/DX rev. 1
> > (**) S3V: chipset driver: s3_VIRGE
> > (**) S3V: videoram:  4096k
> > (**) S3V: Ramdac type: s3_trio64
> > (**) S3V: Ramdac speed: 170 MHz
> > (--) S3V: Using Trio32/64 programmable clock (MCLK 69.801 MHz)
> > (--) S3V: Maximum allowed dot-clock: 170.000 MHz
> > (**) S3V: Mode "1024x768": mode clock =  75.000
> > (**) S3V: Mode "800x600": mode clock =  60.750
> > (**) S3V: Mode "640x480": mode clock =  30.000
> > (**) S3V: Using 16 bpp.  Color weight: 565
> > (--) S3V: Virtual resolution set to 1024x768
> > (--) S3V: Local bus LAW is 0xF00xxxxx
> > (--) S3V: Using a banksize of 4096k, line width of 1024
> > System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm
> > -m fr -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml
> > "Errors from xkbcomp are not fatal to the X server" keymap/xfree86
> > /var/tmp/xfree86.xkm'
> > 
> > Any idea ?
> > 
> > Pascal Thivent
> > 
> > --
> > Unsubscribe?  mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> 



Reply to: