[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: NCR53C9x (MCA) SCSI problem with scanner

On November 19, 2000 08:49 pm, Lee Elliott wrote:
> Seems like it's just a conflict between the controller and the
> scanner because the other devices work ok.  As it crashes anyway,
> with termination on the controller, try it without.
> man sane-scsi only briefly refers to the ncr53c8xx controller in the
> context of 2.0 kernels.  You could try setting the
> SANE_DEBUG_SANEI_SCSI variable to see if anything in the debug
> messages help.  Also check sane-hp.

I will try that.  

I changed the motherboard termination, but that didn't help.  I also 
loaded up Win95 and tried HP's software which worked perfectly.  I 
assume it is not a problem with the controller or setup, but with the 
driver or SANE.

Shawn D'Alimonte   sdalimon@home.com

Reply to: