RE: Dual NIC Problem
Thanks for the response.
I have tried to set up a telnet session using both the ip and host name.
When using the ip number I get just the "telnet> " prompt with no error
messages. When I use the host name and get and "Unknown Host" error. I can
ping the ip address without any problem.
Brian
On Thu, Sep 28, 2000 at 11:38:13AM -0400, Kimsey-Hickman, Brian wrote:
> I am a new Debian (2.2) user and am trying to set up an Intel machine for
> two NIC cards. One NIC will monitor (tcpdump) one ethernet segment while
I
> telnet into the machine on the other NIC on another segment. eth0 is on
the
> segment I want to monitor. eth1 is the one I was planning to telnet into.
> The problem is that I do not get a login prompt when I telnet into the
> device, I get a "telnet> " prompt. If someone could point me in the right
> direction, either to some written resources or advice, I would greatly
> appreciate it.
Did you try "telnet ip_or_name_of_machine"? You only
get a prompt if you only type in "telnet". What error messages do you get?
Can you ping your machine's ip-adresses?
--
Thomas Guettler
Office: <guettli@interface-business.de> www.interface-business.de
Private:<guettli@gmx.de> http://yi.org/guettli
--
Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org <
/dev/null
Reply to: