getting rid of ide-scsi-emulation
Hi!
Until recently I had an IDE-cd-recorder, so I used ide-scsi-emulation
to get it running, compiled it into the kernel and put it into lilo
append="ether=5,0x360,eth1 hda=49585,16,63 hdc=ide-scsi
max_scsi_luns=1"
Now that I have a SCSI one, I want to get rid of the emulation, but
don´t want to compile yet another kernel, so I simply removed the
ide-scsi-bit from the append-line and re-run lilo
append="ether=5,0x360,eth1 hda=49585,16,63"
I thought all was well until I looked at the screen while rebooting
today (complete output at the far below):
scsi : detected 1 SCSI tape 9 SCSI cdroms total.
Now I physically have a scsi-tape, a scsi-cdr and an ide-cdrom, and I
know that last time I looked it said about 1 scsi tape and 1 scsi cdr,
just as it should.
Any hints (other than recompile without ide-scsi-emu)?
TIA,
&rw
scsi-ncr53c7,8xx : at PCI bus 0, device 12, function 0
scsi-ncr53c7,8xx : warning : revision of 35 is greater than 2.
scsi-ncr53c7,8xx : NCR53c810 at memory 0xf8800000, io 0xd400, irq 10
scsi0 : burst length 8
scsi0 : NCR code relocated to 0x90600 (virt 0x00090600)
scsi0 : test 1 started
scsi0 : NCR53c{7,8}xx (rel 17)
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 2 hosts.
scsi0 : target 1 accepting asynchronous SCSI
scsi0 : setting target 1 to asynchronous SCSI
Vendor: HP Model: C1533A Rev: 9503
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 1, lun 0
scsi0 : target 4 accepting asynchronous SCSI
scsi0 : setting target 4 to asynchronous SCSI
Vendor: TEAC Model: CD-R58S Rev: 1.0K
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Detected scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi1, channel 0, id 0, lun 1
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi1, channel 0, id 0, lun 2
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi1, channel 0, id 0, lun 3
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr5 at scsi1, channel 0, id 0, lun 4
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr6 at scsi1, channel 0, id 0, lun 5
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr7 at scsi1, channel 0, id 0, lun 6
Vendor: ASUS Model: CD-S500/A Rev: 1.20
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr8 at scsi1, channel 0, id 0, lun 7
scsi : detected 1 SCSI tape 9 SCSI cdroms total.
Type: CD-ROM ANSI SCSI revision: 02
--
/ Robert Waldner <Waldner@KPNQwest.at> | Phone: +43 1 89933 0 Fax x533 \
\ KPNQwest/AT tech staff | Diefenbachg. 35 A-1150 Wien /
Reply to: