RE: PPP help (bit 7 set to 0)
I did use pppconfig to configure the scripts.
I've used PAP and chat. I can get chat through the login process (ogin: and
but then it establishes a connection and sends LCP ConfReq and does not get
a reply and then I get LCP: timeout.
I will type the scripts into this message (I have no lan or ppp connection
the debian box.)
connect "/usr/sbin/chat -v -f /etc/chatscripts/vaix"
user <username is here>
my /etc/chatscript/* is:
ogin: <login here>
ssword: \q<password here> (should that \q be there?)
Those are my chatscript files for this connection. I can actually get dialed
up, I see the remote modem ask for ogin: and ssword: and the scripts respond
to that. Then it sets up the serial connection and sends the LCP ConfReq.
Then it repeats that 9 times and gives the message:
(from /var/log/messages and /etc/ppp/log)
LCP: timeout sending Config-Requests
Receive serial link is not 8-bit clean:
Problem: all had bit7 set to 0
This is the message I get rather I connect via Chat or PAP. The chat logs in
first, and the PAP will give this message right away. Any help is MUCH
Thank you kindly!
> -----Original Message-----
> From: email@example.com [mailto:firstname.lastname@example.org]
> Sent: Sunday, July 02, 2000 10:27 AM
> To: email@example.com
> Subject: Re: PPP help (bit 7 set to 0)
> Ashby writes:
> > Received serial link is not 8-bit clean. Problem: all had
> bit 7 set to
> > 0. Exit.
> If you did not use pppconfig to configure ppp do so. If you did, post
> /etc/chatscripts/provider and /etc/ppp/peers/provider (remove
> BTW the plog command will show you the ppp log, which is in
> John Hasler
> Dancing Horse Hill
> Elmwood, Wisconsin
> Unsubscribe? mail -s unsubscribe
> firstname.lastname@example.org < /dev/null