Re: Please help - network incredibly slow...
A couple of general comments...
You don't have standard PC hardware - regular PCs only have IRQs
0-15 whereas you're using IRQ 18 & 19. I assume that they are
supported on your hardware, but if your problem relates to your
specific platform then those familiar with your platform may be
better-equipped to comment.
The second machine you have seems to have a lot of problems with
eth0 - 14 framing errors in 333 packets is very high. Have you
tried replacing your cable/NIC on that end?
On Mon, May 22, 2000 at 12:21:17AM +0200, Christian Pernegger wrote
> Thanks for your reply!
>
> Info coming up... (attached, unix line breaks)
>
> I just hope they're readable - I have to mail from
> NT because I haven't had time to get exim to do my bidding yet :(
>
> Regards
>
> Christian
>
>
> > -----Original Message-----
> > From: John Pearson [mailto:huiac@camtech.net.au]
> > Sent: Sunday, May 21, 2000 4:15 AM
> > To: Debian user list
> > Subject: Re: Please help - network incredibly slow...
> >
> > It would be handy if you provided the output of /sbin/ifconfig and
> > cat /proc/interrupts for one of the machines. My first guess would
> > be a shared IRQ.
> >
> >
> > John P.
> eth0 Link encap:Ethernet HWaddr 00:50:BA:E5:F0:6B
> inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:1049453 errors:0 dropped:0 overruns:0 frame:0
> TX packets:1152282 errors:2058 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:18 Base address:0xb000
>
> eth1 Link encap:Ethernet HWaddr 00:10:5A:F7:E5:54
> inet addr:212.17.124.103 Bcast:212.17.124.255 Mask:255.255.255.0
> UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:47440 errors:0 dropped:0 overruns:0 frame:0
> TX packets:2108 errors:0 dropped:0 overruns:0 carrier:5
> collisions:0 txqueuelen:100
> Interrupt:17 Base address:0xa800
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
> RX packets:10 errors:0 dropped:0 overruns:0 frame:0
> TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
>
> CPU0 CPU1
> 0: 247145 245199 IO-APIC-edge timer
> 1: 1695 1635 IO-APIC-edge keyboard
> 2: 0 0 XT-PIC cascade
> 8: 0 1 IO-APIC-edge rtc
> 13: 1 0 XT-PIC fpu
> 17: 24799 24794 IO-APIC-level eth1
> 18: 1008935 1008938 IO-APIC-level eth0
> 19: 19823 19793 IO-APIC-level aic7xxx, EMU10K1
> NMI: 0
> ERR: 0
> eth0 Link encap:Ethernet HWaddr 00:60:08:81:72:87
> inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:333 errors:9 dropped:0 overruns:0 frame:14
> TX packets:247 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> Interrupt:9 Base address:0x6000
>
> lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
> RX packets:18 errors:0 dropped:0 overruns:0 frame:0
> TX packets:18 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
>
> CPU0
> 0: 340292 XT-PIC timer
> 1: 2 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 8: 1 XT-PIC rtc
> 9: 745 XT-PIC eth0
> 13: 0 XT-PIC fpu
> 14: 16564 XT-PIC ide0
> NMI: 0
John P.
--
huiac@camtech.net.au
john@huiac.apana.org.au
http://www.mdt.net.au/~john Debian Linux admin & support:technical services
Reply to: